Jean, >These were probed, but NOT detected. You have a chip here but your >version of sensors-detect doesn't know what it is. Please try the >latest version of sensors-detect, as Brian did: >http://www.lm-sensors.org/browser/lm-sensors/trunk/prog/detect/sensors->det ect?format=txt >I wouldn't be surprised if you have the same chip as Brian. I ran the new sensors-detect and the chip detected was the same as Brian's. Can you please add my name also to the list of those interested in this driver. The output from the latest sensors-detect is at the bottom of this page. Thank you for all of your help. Lou By the way, I heard back from ECS. Their response: ----------ECS Response ---------- Dear Valued Customer: If a monitoring software is being used and is failing to collect data for the CPU temprature, the software is incompatible and no monitoring software is available for the board since Hardware Monitor was already integrated in the BIOS. Thank you for using ECS products --------------------------------- ----- sensors-detect output ----- # ./sensors-detect # sensors-detect revision $Revision$ ($Date$) This program will help you determine which I2C/SMBus modules you need to load to use lm_sensors most effectively. You need to have i2c and lm_sensors installed before running this program. Also, you need to be `root', or at least have access to the /dev/i2c-* files, for most things. If you have patched your kernel and have some drivers built in, you can safely answer NO if asked to load some modules. In this case, things may seem a bit confusing, but they will still work. It is generally safe and recommended to accept the default answers to all questions, unless you know what you're doing. We can start with probing for (PCI) I2C or SMBus adapters. You do not need any special privileges for this. Do you want to probe now? (YES/no): YES Probing for PCI bus adapters... Use driver `i2c-nforce2' for device 00:01.1: nVidia Corporation nForce3 250Gb SMBus (MCP) Probe succesfully concluded. We will now try to load each adapter module in turn. Module `i2c-nforce2' already loaded. If you have undetectable or unsupported adapters, you can have them scanned by manually loading the modules before running this script. To continue, we need module `i2c-dev' to be loaded. If it is built-in into your kernel, you can safely skip this. i2c-dev is already loaded. We are now going to do the adapter probings. Some adapters may hang halfway through; we can't really help that. Also, some chips will be double detected; we choose the one with the highest confidence value in that case. If you found that the adapter hung after probing a certain address, you can specify that address to remain unprobed. That often includes address 0x69 (clock chip). Next adapter: SMBus nForce2 adapter at 4c40 Do you want to scan it? (YES/no/selectively): YES Client found at address 0x08 Client found at address 0x4c Probing for `National Semiconductor LM75'... Failed! Probing for `Dallas Semiconductor DS1621'... Failed! Probing for `Analog Devices ADM1021'... Failed! Probing for `Analog Devices ADM1021A/ADM1023'... Failed! Probing for `Maxim MAX1617'... Failed! Probing for `Maxim MAX1617A'... Failed! Probing for `TI THMC10'... Failed! Probing for `National Semiconductor LM84'... Failed! Probing for `Genesys Logic GL523SM'... Failed! Probing for `Onsemi MC1066'... Failed! Probing for `Maxim MAX1619'... Failed! Probing for `National Semiconductor LM82/LM83'... Failed! Probing for `National Semiconductor LM90'... Failed! Probing for `National Semiconductor LM89/LM99'... Failed! Probing for `National Semiconductor LM86'... Failed! Probing for `Analog Devices ADM1032'... Failed! Probing for `Maxim MAX6657/MAX6658/MAX6659'... Failed! Probing for `National Semiconductor LM63'... Failed! Probing for `Fintek F75363SG'... Failed! Probing for `Maxim MAX6633/MAX6634/MAX6635'... Failed! Probing for `Analog Devices ADT7461'... Failed! Probing for `Fintek F75383S/M'... Success! (confidence 7, driver `to-be-written') Next adapter: SMBus nForce2 adapter at 4c00 Do you want to scan it? (YES/no/selectively): YES Client found at address 0x08 Client found at address 0x50 Probing for `SPD EEPROM'... Success! (confidence 8, driver `eeprom') Probing for `DDC monitor'... Failed! Probing for `Maxim MAX6900'... Failed! Client found at address 0x51 Probing for `SPD EEPROM'... Success! (confidence 8, driver `eeprom') Some chips are also accessible through the ISA bus. ISA probes are typically a bit more dangerous, as we have to write to I/O ports to do this. This is usually safe though. Do you want to scan the ISA bus? (YES/no): YES Probing for `National Semiconductor LM78' Trying address 0x0290... Failed! Probing for `National Semiconductor LM78-J' Trying address 0x0290... Failed! Probing for `National Semiconductor LM79' Trying address 0x0290... Failed! Probing for `Winbond W83781D' Trying address 0x0290... Failed! Probing for `Winbond W83782D' Trying address 0x0290... Failed! Probing for `Winbond W83627HF' Trying address 0x0290... Failed! Probing for `Winbond W83627EHF' Trying address 0x0290... Failed! Probing for `Winbond W83627DHG' Trying address 0x0290... Failed! Probing for `Silicon Integrated Systems SIS5595' Trying general detect... Failed! Probing for `VIA Technologies VT82C686 Integrated Sensors' Trying general detect... Failed! Probing for `VIA Technologies VT8231 Integrated Sensors' Trying general detect... Failed! Probing for `ITE IT8712F' Trying address 0x0290... Success! (confidence 8, driver `it87') Probing for `ITE IT8705F / SiS 950' Trying address 0x0290... Failed! Probing for `IPMI BMC KCS' Trying address 0x0ca0... Failed! Probing for `IPMI BMC SMIC' Trying address 0x0ca8... Failed! Some Super I/O chips may also contain sensors. Super I/O probes are typically a bit more dangerous, as we have to write to I/O ports to do this. This is usually safe though. Do you want to scan for Super I/O sensors? (YES/no): YES Probing for `ITE 8702F Super IO Sensors' Failed! (0x8712) Probing for `ITE 8705F Super IO Sensors' Failed! (0x8712) Probing for `ITE 8712F Super IO Sensors' Success... found at address 0x0290 Probing for `Nat. Semi. PC87351 Super IO Fan Sensors' Failed! (skipping family) Probing for `SMSC 47B27x Super IO Fan Sensors' Failed! (skipping family) Probing for `VT1211 Super IO Sensors' Failed! (skipping family) Probing for `Winbond W83627EHF/EHG Super IO Sensors' Failed! (skipping family) Do you want to scan for secondary Super I/O sensors? (YES/no): YES Probing for `ITE 8702F Super IO Sensors' Failed! (skipping family) Probing for `Nat. Semi. PC87351 Super IO Fan Sensors' Failed! (skipping family) Probing for `SMSC 47B27x Super IO Fan Sensors' Failed! (skipping family) Probing for `VT1211 Super IO Sensors' Failed! (skipping family) Probing for `Winbond W83627EHF/EHG Super IO Sensors' Failed! (skipping family) Now follows a summary of the probes I have just done. Just press ENTER to continue: Driver `to-be-written' (should be inserted): Detects correctly: * Bus `SMBus nForce2 adapter at 4c40' Busdriver `i2c-nforce2', I2C address 0x4c Chip `Fintek F75383S/M' (confidence: 7) Driver `eeprom' (should be inserted): Detects correctly: * Bus `SMBus nForce2 adapter at 4c00' Busdriver `i2c-nforce2', I2C address 0x50 Chip `SPD EEPROM' (confidence: 8) * Bus `SMBus nForce2 adapter at 4c00' Busdriver `i2c-nforce2', I2C address 0x51 Chip `SPD EEPROM' (confidence: 8) Driver `it87' (should be inserted): Detects correctly: * ISA bus address 0x0290 (Busdriver `i2c-isa') Chip `ITE 8712F Super IO Sensors' (confidence: 9) I will now generate the commands needed to load the I2C modules. To make the sensors modules behave correctly, add these lines to /etc/modules.conf: #----cut here---- # I2C module options alias char-major-89 i2c-dev #----cut here---- To load everything that is needed, add this to some /etc/rc* file: #----cut here---- # I2C adapter drivers modprobe i2c-nforce2 modprobe i2c-isa # I2C chip drivers # no driver for Fintek F75383S/M yet modprobe eeprom modprobe it87 # sleep 2 # optional /usr/local/bin/sensors -s # recommended #----cut here---- WARNING! If you have some things built into your kernel, the list above will contain too many modules. Skip the appropriate ones! You really should try these commands right now to make sure everything is working properly. Monitoring programs won't work until it's done. Do you want to generate /etc/sysconfig/lm_sensors? (YES/no): no
