Hi Jean, I've got some very first version, reading temperatures, fan speeds, and voltage. See attachment. (Hopefully it is OK to post it here?) Except that the values it reports don't match the values shown in the bios. The temperatures shown in the bios are about 4 degrees higher (53 to 54 degree Celsius), the voltages don't match, and the fan speeds are completely mad: % cat /sys/bus/i2c/devices/0-002d/fan?_input 471 4094 % cat /sys/bus/i2c/devices/0-002d/temp?_input 49125 49125 40250 % cat /sys/bus/i2c/devices/0-002d/in?_input 1576 912 1008 1016 If I compare this to the output of i2cdump, then I don't see a difference. AFAICS the /sys entries and the registers match. Any idea? Is it possible that the datasheet is not correct? Regards Harri -------------- next part -------------- A non-text attachment was scrubbed... Name: f75387.c Type: text/x-csrc Size: 15096 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060526/935fe4c6/attachment.bin -------------- next part -------------- A non-text attachment was scrubbed... Name: signature.asc Type: application/pgp-signature Size: 252 bytes Desc: OpenPGP digital signature Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060526/935fe4c6/attachment-0001.bin
