Hi Jean,
Sorry for the late response. See below.
Jean Delvare wrote:
> Hallo Harald,
>
>
> I don't see the version of lm_sensors in your second report, I'll
> assume 2.10.0.
>
Yes, it is.
> I'm surprised that the thermal sensor types changed from "diode" to
> "thermistor". These settings are not supposed to change on their own.
> Did you change anything in your configuration file? It probably doesn't
> matter much here, as these inputs seem to be unused, but I'm curious.
>
No, I did not change this file. Currently sensors replies "diode"
again.
> The output of sensors-detect is interesting:
>
>
>>Next adapter: SMBus I801 adapter at 5000
>>(...)
>>Client found at address 0x2d
>
> (All Failed)
>
>>Client found at address 0x2f
>
> (All Failed)
>
> These are typical addresses for hardware monitoring chips, so I start
> suspecting that one of these is your real fans + temperatures sensor
> chip, either a recent or rare type which we don't know about yet.
>
> Please provide the output of the following commands (which will dump the
> contents of these chips for further analysis) as root:
>
> modprobe i2c-dev
> i2cdump 0 0x2d b
> i2cdump 0 0x2f b
>
No problem, see below. Please mail if more information is needed.
Many thanx in advance
Harri
==========================================================================
{root at bugs:harri 1001} modprobe i2c-dev
{root at bugs:harri 1001} i2cdump 0 0x2d b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2d, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 01 07 00 40 5a ff ff ff ff ff ff ff ff ff ff ff ??. at Z...........
10: c5 72 7e 85 25 22 01 df 0f fe 00 00 1c 80 ad 07 ?r~?%"????..????
20: ff 00 ff 00 ff 00 ff 00 4b 4b 4b 4b 3c 37 00 ff ........KKKK<7..
30: 00 b0 b0 00 00 00 30 ff ff ff ff ff ff ff ff ff .??...0.........
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: ff ff ff ff ff ff ff ff ff ff 04 10 20 19 34 ff ..........?? ?4.
60: bb 0a 90 00 01 00 00 0f ff 55 64 46 64 46 ff ff ???.?..?.UdFdF..
70: 02 ab ff ff 00 00 ff ff ff ff ff ff ff ff ff ff ??..............
80: 0f ff ff ff 00 00 ff ff ff ff ff ff ff ff ff ff ?...............
90: 00 00 0d ff ff ff ff ff ff ff ff ff ff ff ff ff ..?.............
a0: 46 3c 32 28 ff d9 b2 99 80 ff ff ff ff ff ff ff F<2(.????.......
b0: 46 3c 32 28 ff d9 b2 99 80 ff ff ff ff ff ff ff F<2(.????.......
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: 00 00 00 00 00 00 39 38 01 45 00 ff ff ff ff 27 ......98?E.....'
{root at bugs:harri 1002} i2cdump 0 0x2f b
WARNING! This program can confuse your I2C bus, cause data loss and worse!
I will probe file /dev/i2c-0, address 0x2f, mode byte
Continue? [Y/n]
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: ff 03 07 f0 22 08 ff ff ff ff ff ff ff ff ff ff .???"?..........
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
20: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
50: ff ff ff ff ff ff ff ff ff ff 03 02 12 19 34 ff ..........????4.
60: ff ff ff ff ff ff ff ff ff ff a0 a0 ff ff ff ff ..........??....
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ................
f0: 00 80 ff ff ff ff ff ff ff ff ff ff ff ff ff 5e .?.............^
{root at bugs:harri 1003} sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +1.37 V (min = +1.94 V, max = +1.94 V) ALARM
+12V: +12.22 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.18 V (min = +3.14 V, max = +3.47 V)
+5V: +4.91 V (min = +4.75 V, max = +5.25 V)
-12V: -12.11 V (min = -13.18 V, max = -10.80 V)
V5SB: +5.05 V (min = +4.76 V, max = +5.24 V)
VBat: +3.09 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 664 RPM, div = 8) ALARM
CPU Fan: 0 RPM (min = 664 RPM, div = 8) ALARM
fan3: 0 RPM (min = 664 RPM, div = 8) ALARM
M/B Temp: +6 C (high = -87 C, hyst = +125 C) sensor = diode
CPU Temp: -7.5 C (high = +80 C, hyst = +75 C) sensor = diode
temp3: +7.5 C (high = +80 C, hyst = +75 C) sensor = diode (beep)
alarms:
beep_enable:
Sound alarm enabled
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 258 bytes
Desc: OpenPGP digital signature
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20060318/05a8f955/attachment.bin
