On Fri, 2006-03-31 at 13:15 +0200, Jean Delvare wrote:
> OK. Can you make sure that libsensors was compiled with sysfs support?
> "ldd /usr/lib/libsensors.so" should have one line for libsysfs.
It's there...
james at cressida:~$ ldd /usr/lib/libsensors.so.3
linux-gate.so.1 => (0xffffe000)
libc.so.6 => /lib/tls/libc.so.6 (0xb7df3000)
libm.so.6 => /lib/tls/libm.so.6 (0xb7dcc000)
libsysfs.so.1 => /lib/libsysfs.so.1 (0xb7dc1000)
/lib/ld-linux.so.2 (0x80000000)
> You have a Super-I/O chip (a.k.a. LPC chip) we don't know about. Given
> the output above, this could be a chip made by ITE, National
> Semiconductor or SMSC. Can you find some documentation about your board
> and/or open the case and locate that chip? Typically they are
> rectangular, with 128 pins, and measure about 20 mm by 12 mm. Sometimes
> these chips have hardware monitoring functionalities.
I found the following SMSC chip:
LPC47M584-NC
B0443-AL1314
8H1190280
Here's a link to a photograph.
http://www.freecharity.org.uk/~james/DSC00300.JPG
> Does the BIOS of your system display any hardware monitoring
> information? Is this system somehow advertise as having hardware
> monitoring capabilities?
Nothing there, I guess that doesn't bode well..
Many thnaks for your help,
James
