Hi Hartmut, in-between is out final 2.6.16 and I tried it before few minutes. I applied patch for ATI chipset from Rudolf too. It works for me, but my board MSI RS480M2-IL probably doesn't have connected voltage inputs and TEMP3 input. It corresponds to latest BIOS, where only fans and two temperatures are visible. Here is output from sensors program: -------------------------------------- [root at home lm_sensors-2.10.0]# sensors smsc47m1-isa-0800 Adapter: ISA adapter fan1: 0 RPM (min = 640 RPM, div = 8) ALARM fan2: 1059 RPM (min = 640 RPM, div = 8) smsc47m192-i2c-0-2d Adapter: SMBus PIIX4 adapter at 0b00 +2.5V: +0.00 V (min = +0.00 V, max = +3.32 V) ALARM VCore: +0.00 V (min = +0.00 V, max = +2.99 V) ALARM +3.3V: +0.00 V (min = +0.00 V, max = +4.38 V) ALARM +5V: +0.00 V (min = +0.00 V, max = +6.64 V) ALARM VCC: +3.37 V (min = +0.00 V, max = +4.38 V) +1.5V: +0.00 V (min = +0.00 V, max = +1.99 V) ALARM +1.8V: +0.00 V (min = +0.00 V, max = +2.39 V) ALARM Chip Temp: +37.0?C (low = -128?C, high = +127?C) CPU Temp: +26.0?C (low = -128?C, high = +60?C) Sys Temp: +117.0?C (low = -128?C, high = +127?C) vid: +1.550 V (VRM Version 2.4) -------------------------------------- ------------- dmesg output: smsc47m1: Found SMSC LPC47M15x/LPC47M192/LPC47M997 i2c_adapter i2c-0: found SMSC47M192 or SMSC47M997, version 2, stepping A0 ------------- I must add line "MODULE_4=smsc47m192" for automatic loading of module. Best regards, Pavel Ruzicka > I guess I forgot to mention that the patch was for kernel version > 2.6.16-rc5 - sorry for that. > > For convenience, I attach the corresponding patch for 2.6.15 to this > email. > > Best wishes, > Hartmut
