Mark M. Hoffman wrote: >Hi: > >* embree at speakeasy.net <embree at speakeasy.net> [2006-01-11 04:37:59 +0000]: > > >>I have searched in vain for a solution to my problem I was going to submit >>a support ticket but your website said to submit here instead. so here it >>goes. >> >>I've followed all instructions I could find. It seems as if all modules get >>detected and load fine. Yet running 'sensors returns 'No sensors found'. Any >>thoughts????? >> >> > >I guess: unload eeprom, i2c-amd756, and i2c-amd8111; then try again. Your >hardware monitor (w83627hf or some such) is probably visible through i2c-isa >alone. If that doesn't work, please send the output from sensors-detect. > >Anyway, it looks like i2c-amd756 and/or i2c-amd8111 is hosed up. I'm not sure >why. Can anyone else jump in on that? > > I haven't had the chance yet to try this but I did try a new kernel and that worked. I tried kernel 2.6.15 w/ gentoo and ck patches. I will try you above suggestion and also vanilla kernel 2.6.15 for comparison. Thanks for your help! > > >>Kernel 2.6.14.5 (with gentoo patches)(SMP Opteron 64 bit) >>lm_sensors 2.9.2 >>Motherboard Tyan Tiger K8W S2875 Bios 3.02 >> >>Here's all the relavant output I can think of. btw this is will all i2c debugging kernel options on) >> >>lspci >>Code: >>00:00.0 Host bridge: Advanced Micro Devices [AMD] AMD-8151 System Controller (rev 13) >>00:01.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8151 AGP Bridge (rev 13) >>00:06.0 PCI bridge: Advanced Micro Devices [AMD] AMD-8111 PCI (rev 07) >>00:07.0 ISA bridge: Advanced Micro Devices [AMD] AMD-8111 LPC (rev 05) >>00:07.1 IDE interface: Advanced Micro Devices [AMD] AMD-8111 IDE (rev 03) >>00:07.2 SMBus: Advanced Micro Devices [AMD] AMD-8111 SMBus 2.0 (rev 02) >>00:07.3 Bridge: Advanced Micro Devices [AMD] AMD-8111 ACPI (rev 05) >>00:07.5 Multimedia audio controller: Advanced Micro Devices [AMD] AMD-8111 AC97 Audio (rev 03) >>00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration >>00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map >>00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller >>00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control >>01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900XT] (rev a1) >>02:00.0 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) >>02:00.1 USB Controller: Advanced Micro Devices [AMD] AMD-8111 USB (rev 0b) >>02:03.0 Ethernet controller: Intel Corporation 82541EI Gigabit Ethernet Controller (Copper) >>02:05.0 Mass storage controller: Silicon Image, Inc. SiI 3114 [SATALink/SATARaid] Serial ATA Controller (rev 02) >>02:0a.0 FireWire (IEEE 1394): VIA Technologies, Inc. IEEE 1394 Host Controller (rev 80) >>02:0b.0 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) >>02:0b.1 USB Controller: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller (rev 61) >>02:0b.2 USB Controller: VIA Technologies, Inc. USB 2.0 (rev 62) >> >> >>lsmod >> >>Code: >>Module Size Used by >>nfs 211304 1 >>lockd 70096 2 nfs >>sunrpc 162632 3 nfs,lockd >>w83627hf 30480 0 >>hwmon_vid 3008 1 w83627hf >>hwmon 3784 1 w83627hf >>eeprom 8720 0 >>i2c_isa 7040 1 w83627hf >>snd_seq 62080 0 >>snd_seq_device 10192 1 snd_seq >>pwc 52492 0 >>videodev 12416 1 pwc >>snd_intel8x0 37160 3 >>snd_ac97_codec 108568 1 snd_intel8x0 >>snd_ac97_bus 3008 1 snd_ac97_codec >>snd_pcm 101000 3 snd_intel8x0,snd_ac97_codec >>snd_timer 27208 3 snd_seq,snd_pcm >>snd 63072 10 snd_seq,snd_seq_device,snd_intel8x0,snd_ac97_codec,snd_pcm,snd_timer >>soundcore 12128 1 snd >>snd_page_alloc 12240 2 snd_intel8x0,snd_pcm >>i2c_amd756 8900 0 >>i2c_amd8111 7040 0 >>nvidia 4857712 12 >>sbp2 25860 0 >>ohci1394 35020 0 >>ieee1394 108664 2 sbp2,ohci1394 >>usb_storage 70400 0 >>usbhid 40032 0 >> >> >>Relavent dmesg >>Code: >>ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19 >>NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:58:07 PST 2005 >>i2c_adapter i2c-0: adapter [SMBus2 AMD8111 adapter at c480] registered >>amd756_smbus 0000:00:07.3: SMBREV = 0x5 >>amd756_smbus 0000:00:07.3: AMD756_smba = 0x10E0 >>i2c_adapter i2c-1: adapter [SMBus AMD8111 adapter at 10e0] registered >>ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 18 >>intel8x0_measure_ac97_clock: measured 50753 usecs >>intel8x0: clocking to 48000 >>Linux video capture interface: v1.00 >>pwc Philips webcam module version 9.0.2-unofficial loaded. >>pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. >>pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, >>pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. >>pwc Logitech QuickCam 4000 Pro USB webcam detected. >>pwc Registered as /dev/video0. >>usbcore: registered new driver Philips webcam >>e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Half Duplex >>i2c_adapter i2c-9191: ISA main adapter registered >>i2c-core: driver [eeprom] registered >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x50 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x51 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x52 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x53 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x54 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x55 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x56 >>i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x57 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x50 >>i2c_adapter i2c-1: Transaction (pre): GS=0004, GE=0000, ADD=00a0, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a0, DAT=0002 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x51 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>i2c_adapter i2c-1: SMBus protocol success! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>i2c_adapter i2c-1: SMBus protocol success! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>i2c_adapter i2c-1: client [eeprom] registered with bus id 1-0051 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x52 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a4, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a4, DAT=0002 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x53 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a6, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a6, DAT=0002 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x54 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a8, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a8, DAT=0002 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x55 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00aa, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00aa, DAT=0002 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x56 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00ac, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00ac, DAT=0002 >>i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x57 >>i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00ae, DAT=0002 >>i2c_adapter i2c-1: SMBus Protocol error (no response)! >>i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00ae, DAT=0002 >>i2c_adapter i2c-9191: Driver w83627hf registered >> >>Relevant /var/log/messages >>Code: >>Jan 9 17:27:23 Gentoo64 ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 19 >>Jan 9 17:27:23 Gentoo64 NVRM: loading NVIDIA Linux x86_64 NVIDIA Kernel Module 1.0-8178 Wed Dec 14 16:58:07 PST 2005 >>Jan 9 17:27:23 Gentoo64 i2c_adapter i2c-0: adapter [SMBus2 AMD8111 adapter at c480] registered >>Jan 9 17:27:23 Gentoo64 amd756_smbus 0000:00:07.3: SMBREV = 0x5 >>Jan 9 17:27:23 Gentoo64 amd756_smbus 0000:00:07.3: AMD756_smba = 0x10E0 >>Jan 9 17:27:23 Gentoo64 i2c_adapter i2c-1: adapter [SMBus AMD8111 adapter at 10e0] registered >>Jan 9 17:27:23 Gentoo64 ACPI: PCI Interrupt 0000:00:07.5[B] -> GSI 17 (level, low) -> IRQ 18 >>Jan 9 17:27:23 Gentoo64 intel8x0_measure_ac97_clock: measured 50753 usecs >>Jan 9 17:27:23 Gentoo64 intel8x0: clocking to 48000 >>Jan 9 17:27:23 Gentoo64 Linux video capture interface: v1.00 >>Jan 9 17:27:23 Gentoo64 pwc Philips webcam module version 9.0.2-unofficial loaded. >>Jan 9 17:27:23 Gentoo64 pwc Supports Philips PCA645/646, PCVC675/680/690, PCVC720[40]/730/740/750 & PCVC830/840. >>Jan 9 17:27:23 Gentoo64 pwc Also supports the Askey VC010, various Logitech Quickcams, Samsung MPC-C10 and MPC-C30, >>Jan 9 17:27:23 Gentoo64 pwc the Creative WebCam 5 & Pro Ex, SOTEC Afina Eye and Visionite VCS-UC300 and VCS-UM100. >>Jan 9 17:27:23 Gentoo64 pwc Logitech QuickCam 4000 Pro USB webcam detected. >>Jan 9 17:27:23 Gentoo64 pwc Registered as /dev/video0. >>Jan 9 17:27:23 Gentoo64 usbcore: registered new driver Philips webcam >>Jan 9 17:27:23 Gentoo64 rc-scripts: Configuration not set for eth0 - assuming dhcp >>Jan 9 17:27:23 Gentoo64 e1000: eth0: e1000_watchdog_task: NIC Link is Up 100 Mbps Half Duplex >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-9191: ISA main adapter registered >>Jan 9 17:27:29 Gentoo64 i2c-core: driver [eeprom] registered >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x50 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x51 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x52 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x53 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x54 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x55 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x56 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-0: found normal entry for adapter 0, addr 0x57 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x50 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0004, GE=0000, ADD=00a0, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a0, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x51 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus protocol success! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus protocol success! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a2, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: client [eeprom] registered with bus id 1-0051 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x52 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a4, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a4, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x53 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a6, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a6, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x54 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00a8, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00a8, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x55 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00aa, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00aa, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x56 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00ac, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00ac, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: found normal entry for adapter 1, addr 0x57 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (pre): GS=0000, GE=0000, ADD=00ae, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: SMBus Protocol error (no response)! >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-1: Transaction (post): GS=0000, GE=0000, ADD=00ae, DAT=0002 >>Jan 9 17:27:29 Gentoo64 i2c_adapter i2c-9191: Driver w83627hf registered >> >> >>I'm lost I don't know what else to try. Any suggestion would be more than appreciated. >> >>PS MY bios allow both ACPI version 1 or 2 I've tried both and got the same results. >> >>Thanks in advance!!!!!!!!! >> >> > >Regards, > > >
