Hi Steven, > Anyways, here's the successful output: > (...) > w83687thf-isa-0290 > Adapter: ISA adapter > in0: +1.10 V (min = +0.70 V, max = +1.87 V) Most probably your CPU Core voltage. Is it correct? What's your CPU? > in1: +1.52 V (min = +2.54 V, max = +2.11 V) ALARM I'd guess this is the AGP voltage (nominal is +1.5V). > in2: +3.30 V (min = +2.86 V, max = +1.66 V) ALARM And this could be +3.3V. > in3: +2.99 V (min = +2.05 V, max = +3.36 V) > in4: +2.59 V (min = +3.49 V, max = +2.14 V) ALARM > in7: +2.94 V (min = +0.16 V, max = +0.42 V) ALARM These ones are probably greater voltages (+5V, +12V...) scaled down. Or in4 may be Vdimm. > in8: +3.30 V (min = +0.38 V, max = +3.14 V) ALARM I'd guess 3VSB (same as +3.3V but when your system is in standby mode.) > fan1: 1328 RPM (min = 9375 RPM, div = 8) ALARM > fan2: 1339 RPM (min = 1016 RPM, div = 8) > fan3: 0 RPM (min = 6136 RPM, div = 2) ALARM If you only have these two slow fans in the box, that looks OK. > temp1: +39?C (high = -122?C, hyst = -41?C) sensor = diode ALARM > temp2: +39.0?C (high = +80?C, hyst = +75?C) sensor = diode > temp3: +59.0?C (high = +80?C, hyst = +75?C) sensor = diode May be OK too. You should set temp1's limits to something more reasonable though. > vid: +0.275 V (VRM Version 9.0) Bogus, and this is expected as the W83687THF needs completely different code for VID, which my initial patch didn't have. I've implemented that now, a new patch is available here: http://jdelvare.net2.nerim.net/sensors/hwmon-w83627hf-add-w83687thf-support.patch Note that it only applies to Linus' git tree (or any recent mm tree), not 2.6.15 - unless you fix the few rejects manually. > Pretty happy camper here! Thanks so much guys. > (...) > Anyways, definitely count me in for testing any revised/changed code as > the result of info gleaned from the data sheet. Looking forward to it! You're welcome. If you happen to test the patch linked above, please report the result. Also, I'd like to work on a sample configuration file for this chip. As the chip is quite rare, maybe we can simply write a configuration file for your board. Can you please visit the BIOS setup screens of your system and report all the hardware monitoring items listed there, in order, with value? Then I'll provide a configuration file for you to test. -- Jean Delvare
