[it8712] +5 V/+12 V are ok, but not -5 V/-12 V....

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Subject: [it8712] +5 V/+12 V are ok, but not -5 V/-12 V....
From: fredantispam at free.fr (fred)
Date: Tue, 20 Dec 2005 23:11:00 +0100
In-reply-to: <20051220230846.5dcbd2f0.khali@xxxxxxxxxxxx>

Jean Delvare a ?crit :

> It's a matter of board, not chip. And 0 is a pretty good indication
> that these inputs are not used (wired to the ground) in your case. You
> can compare with what your BIOS shows if it has hardware monitoring
> information.

Ok, Jean.

Thanks.


-- 
Fred.

References:
- set min/max volt for it8712...
  - From: fred
- set min/max volt for it8712...
  - From: Jean Delvare
- set min/max volt for it8712...
  - From: fred
- set min/max volt for it8712...
  - From: Jean Delvare
- [it8712] +5 V/+12 V are ok, but not -5 V/-12 V....
  - From: fred
- [it8712] +5 V/+12 V are ok, but not -5 V/-12 V....
  - From: Jean Delvare

Prev by Date: [it8712] +5 V/+12 V are ok, but not -5 V/-12 V....
Next by Date: [PATCH 2/7] i2c: scx200_acb - debug log cleanup
Previous by thread: [it8712] +5 V/+12 V are ok, but not -5 V/-12 V....
Next by thread: [PATCH] hdaps: convert to the new platform device interface
Index(es):
- Date
- Thread

[Index of Archives] [Linux Kernel] [Linux Hardware Monitoring] [Linux USB Devel] [Linux Audio Users] [Linux Kernel] [Linux SCSI] [Yosemite Backpacking]

Powered by Linux