Hi Fred, > I want to set min/max voltage for Vcore 1 (in0) and +3.3V (in1). > > >From /etc/sensors.conf : > > chip "it8712-*" > > label in0 "VCore 1" > set in0_min 1.4 * 0.95 > set in0_max 1.4 * 1.05 > label in1 "+3.3V" > set in1_min 3.3 * 0.95 > set in1_max 3.3 * 1.05 > > sensors displays : > it8712-isa-0290 > Adapter: ISA adapter > VCore 1: +1.42 V (min = +4.08 V, max = +4.08 V) ALARM > +3.3V: +3.30 V (min = +4.08 V, max = +4.08 V) ALARM > ^^^^^^^^^^^^^^ ^^^^^^^^^^^^^^^ > +5V: +4.95 V (min = +4.76 V, max = +5.24 V) > +12V: +12.16 V (min = +11.39 V, max = +12.61 V) > Stdby: +3.04 V (min = +2.85 V, max = +3.15 V) > > What's wrong ? What is wrong, I suspect, is that you read neither sensors' manual page nor lm_sensors' FAQ. -- Jean Delvare
