Hi,
My kernel is 2.6.14, i2c-nforce2 & it87, which are known to work
with lm-sensors, are built-in kernel, on a Debian sarge.
it87 works fine (I'll come back later on this, I have a few questions),
but i2c-nforce2 fails :
marsu{pts/0}:~/[1]/> i2cdetect
Error: No i2c-bus specified!
Syntax: i2cdetect [-y] [-a] [-q|-r] I2CBUS [FIRST LAST]
i2cdetect -l
i2cdetect -V
I2CBUS is an integer
With -a, probe all addresses (NOT RECOMMENDED)
With -q, uses only quick write commands for probing (NOT RECOMMENDED)
With -r, uses only read byte commands for probing (NOT RECOMMENDED)
If provided, FIRST and LAST limit the probing range.
With -l, lists installed busses only
Error: No I2C busses found!
Be sure you have done 'modprobe i2c-dev'
and also modprobed your i2c bus drivers
My kernel is set as :
CONFIG_I2C=y
CONFIG_I2C_CHARDEV=y
CONFIG_I2C_ALGOBIT=y
CONFIG_I2C_ISA=y
CONFIG_I2C_NFORCE2=y
CONFIG_FB_NVIDIA_I2C=y (for framebuffer, but now, it's not the problem)
What's wrong ??
Thanks in advance.
--
Fred.
