Roger Lucas schrieb:
>Hi Jean,
>
>Updated patch attached. I love it when you inherit loads of code that you
>end up fixing... :-)
>
>
One problem: As you know, I use a Verax fan with 9 pulses/revolution.
If i use
compute fan1 @/9 , @*9
set fan1_min 1
set fan1_div 1
in sensors.conf, the shortened sensors output is:
fan1: 1324 RPM (min = 571 RPM, div = 1)
and /sys/bus/i2c/devices/9191-6000/fan1_min contains 5140.
But if I use
compute fan1 @/9 , @*9
set fan1_min 0
set fan1_div 1
that results in a sensors output of
fan1: 1324 RPM (min = 0 RPM, div = 1) ALARM
and /sys/bus/i2c/devices/9191-6000/fan1_min contains 0.
The previous patch also behaved wrong for a "set fan1_min 0".
cu,
Knut
