On Sat, 21 May 2005, Rudolf Marek wrote:
> Hmm that I strange. Please can you reboot without loading the module and
> do: cat /proc/ioports Thanks.
OK. After rebooting I found that i2c_i801 and i2c_core were still being
loaded, but that was all:
i2c_i801 8716 0
i2c_core 19200 1 i2c_i801
and ioports looks like:
0000-001f : dma1
0020-0021 : pic1
0040-0043 : timer0
0050-0053 : timer1
0060-006f : keyboard
0070-0077 : rtc
0080-008f : dma page reg
00a0-00a1 : pic2
00c0-00df : dma2
00f0-00ff : fpu
01f0-01f7 : ide0
02f8-02ff : serial
03c0-03df : vga+
03f6-03f6 : ide0
03f8-03ff : serial
0400-0403 : PM1a_EVT_BLK
0404-0405 : PM1a_CNT_BLK
0408-040b : PM_TMR
0428-042f : GPE0_BLK
0500-051f : 0000:00:1f.3
0500-0507 : i801-smbus
d000-dfff : PCI Bus #01
d000-dfff : PCI Bus #02
d000-d00f : 0000:02:01.0
d000-d00f : 3w-xxxx
e000-e007 : 0000:00:02.0
e100-e11f : 0000:00:1d.0
e100-e11f : uhci_hcd
e200-e21f : 0000:00:1d.1
e200-e21f : uhci_hcd
e300-e31f : 0000:00:1d.2
e300-e31f : uhci_hcd
e400-e41f : 0000:00:1d.3
e400-e41f : uhci_hcd
f000-f00f : 0000:00:1f.1
f000-f007 : ide0
f008-f00f : ide1
> Please can you try sensors-detect from CVS or from 2.9.1 version? We are thinking you have Winbond W83792D that is used for HW monitoring.
> You can find the driver in lm_sensors 2.9.1. The driver is currently ported to 2.6 so it is only avaiable for 2.4 kernels
> now.
Will do - I'll let you know.
Thanks once again!
Cheers,
Jon.
--
Jon Still E-mail: jon at tertial.org
tertial.org Web: http://www.tertial.org/
GPG Key: http://xanthein.net/key.asc Key ID: 0x00493D2B
