Hi, I've been having problems with h/w sensors on a Supermicro P8SCi that came as a barebones 1U server (Supermicro 5014C-T). See http://www.supermicro.com/products/system/1U/5014/SYS-5014C-T.cfm which claims the board has a 83627THF chip. I can now detect and load the module for this chip, but my temperatures and fan speeds are reported erroneously. This is using: sensors version 2.9.0 with libsensors version 2.9.0 on: Linux 2.6.11-gentoo-r8 #1 SMP Thu May 19 19:00:00 BST 2005 i686 'sensors' gives this output: w83627thf-isa-0290 Adapter: ISA adapter VCore: +1.94 V (min = +1.94 V, max = +1.94 V) ALARM (beep) +12V: +15.50 V (min = +15.50 V, max = +15.50 V) ALARM (beep) +3.3V: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep) +5V: +6.80 V (min = +6.80 V, max = +6.80 V) ALARM (beep) -12V: -14.91 V (min = -10.80 V, max = -13.18 V) ALARM (beep) V5SB: +6.85 V (min = +6.85 V, max = +6.85 V) ALARM (beep) VBat: +4.08 V (min = +4.08 V, max = +4.08 V) ALARM (beep) fan1: 0 RPM (min = 0 RPM, div = 128) ALARM (beep) CPU Fan: 0 RPM (min = 0 RPM, div = 128) ALARM (beep) fan3: 0 RPM (min = 0 RPM, div = 128) ALARM (beep) M/B Temp: -1 C (high = -1 C, hyst = -1 C) sensor = diode ALARM (beep) CPU Temp: +0.0 C (high = +0 C, hyst = +0 C) sensor = diode ALARM (beep) vid: +0.275 V (VRM Version 9.0) alarms: Chassis intrusion detection ALARM beep_enable: Sound alarm enabled eeprom-i2c-0-51 Adapter: SMBus I801 adapter at 0500 Memory type: DDR2 SDRAM DIMM Memory size (MB): 1024 eeprom-i2c-0-50 Adapter: SMBus I801 adapter at 0500 Memory type: DDR2 SDRAM DIMM Memory size (MB): 1024 'lsmod' reports: w83627hf 29480 0 eeprom 6800 0 i2c_sensor 3968 2 w83627hf,eeprom i2c_isa 2816 0 i2c_i801 8716 0 i2c_core 19200 5 w83627hf,eeprom,i2c_sensor,i2c_isa,i2c_i801 The output of 'sensors-detect' is attached. The sensor hardware is definitely working correctly as I get both fan and CPU readings in the BIOS. Also, when I start lm_sensors using Gentoo's init script, it fails trying to load smbus-arp, as the module does not exist. However from googling, I'm unsure if this is important or not! If anyone can help, I'd be most grateful as I'm drawing blanks at the moment! Thanks, Jon. -- Jon Still E-mail: jon at tertial.org tertial.org Web: http://www.tertial.org/ GPG Key: http://xanthein.net/key.asc Key ID: 0x00493D2B
