Hi Khali,
On Wed, 11 May 2005 10:08:05 +0200 (CEST), "Jean Delvare" <khali at linux-fr.org> wrote:
>
>Not very surprising, as it's not exactly elegant code ;)
>
>All OK except for:
Thankyou, but I noticed RW and changed it to R in adm1026
>This one is not needed, as it will be properly handled by a "constant
>mapping" in proc.c.
Is that the same for adm9240? I tried to follow same style.
--Grant.
Signed-off-by: Grant Coady <gcoady at gmail.com>
---
chips.c | 10 +++++-----
1 files changed, 5 insertions(+), 5 deletions(-)
--- lm_sensors2/lib/chips.c 2005-03-28 01:44:53.000000000 +1000
+++ lm_sensors2a/lib/chips.c 2005-05-11 18:36:54.000000000 +1000
@@ -2010,7 +2010,7 @@ static sensors_chip_feature adm9240_feat
ADM9240_SYSCTL_TEMP, VALUE(1), 1, "temp1_max", 3 },
{ SENSORS_ADM9240_VID, "vid", NOMAP, NOMAP,
- R, ADM9240_SYSCTL_VID, VALUE(1), 2, "in1_ref", 3 },
+ R, ADM9240_SYSCTL_VID, VALUE(1), 3 },
{ SENSORS_ADM9240_FAN1_DIV, "fan1_div", SENSORS_ADM9240_FAN1,
NOMAP, RW,
ADM9240_SYSCTL_FAN_DIV, VALUE(1), 0 },
@@ -2021,7 +2021,7 @@ static sensors_chip_feature adm9240_feat
R, ADM9240_SYSCTL_ALARMS, VALUE(1), 0 },
{ SENSORS_ADM9240_ANALOG_OUT, "analog_out", NOMAP,
NOMAP, RW,
- ADM9240_SYSCTL_ANALOG_OUT, VALUE(1), 0 },
+ ADM9240_SYSCTL_ANALOG_OUT, VALUE(1), 0, "aout_output", 3 },
{ 0 }
};
@@ -2658,8 +2658,8 @@ static sensors_chip_feature adm1025_feat
{ SENSORS_ADM1025_TEMP2_HIGH, "temp2_high", SENSORS_ADM1025_TEMP2,
SENSORS_ADM1025_TEMP2, RW,
ADM1025_SYSCTL_TEMP, VALUE(1), 1 },
- { SENSORS_ADM1025_VID, "vid", NOMAP, NOMAP,
- R, ADM1025_SYSCTL_VID, VALUE(1), 3 , "in1_ref", 3 },
+ { SENSORS_ADM1025_VID, "vid", NOMAP, NOMAP, R, ADM1025_SYSCTL_VID,
+ VALUE(1), 3, "cpu0_vid", 3, "in1_ref" },
{ SENSORS_ADM1025_VRM, "vrm", NOMAP, NOMAP,
RW, ADM1025_SYSCTL_VRM, VALUE(1), 1 },
{ SENSORS_ADM1025_ALARMS, "alarms", NOMAP, NOMAP,
@@ -2682,7 +2682,7 @@ static sensors_chip_feature adm1026_feat
SENSORS_ADM1026_GPIO, NOMAP, R,
ADM1026_SYSCTL_GPIO_MASK, VALUE(1), 0 },
{ SENSORS_ADM1026_VID, "vid",
- NOMAP, NOMAP, RW,
+ NOMAP, NOMAP, R,
ADM1026_SYSCTL_VID, VALUE(1), 3 },
{ SENSORS_ADM1026_VRM, "vrm",
NOMAP, NOMAP, RW,
