Hi David
I had some additional time to work with my WRAP System. I am currently
having troubles getting data from the LM77.
I did the following tasks as described below. I assume that the lm77 is
working properly. But I don't know why no data is transfered.
Do you have any hint where I could start working?
I appreciate any Help!
Best Regards
Miko
------
# modprobe scx200_acb
# modprobe lm77
# i2cdetect 1
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: XX XX XX XX XX XX XX XX XX XX XX XX XX
10: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
20: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
30: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
40: XX XX XX XX XX XX XX XX UU XX XX XX XX XX XX XX
50: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
60: XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX XX
70: XX XX XX XX XX XX XX XX
# sensors
lm77-i2c-0-48
Adapter: SCx200 ACB0
# i2cdump 0 0x48
0 1 2 3 4 5 6 7 8 9 a b c d e f 0123456789abcdef
00: 02 XX 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 ?X.X.?X?X..X.?X?
10: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
20: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
30: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
40: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
50: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
60: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
70: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
80: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
90: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
a0: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
b0: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
c0: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
d0: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
e0: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
f0: XX 00 00 XX 00 04 XX 04 XX 00 00 XX 00 04 XX 04 X..X.?X?X..X.?X?
David Goodenough wrote:
>On Monday 18 April 2005 14:07, Mirko Buholzer wrote:
>
>
>>Hi all
>>
>>I am new to this mailing list and also to the LM_Sensors package. I have
>>a WRAP Embedded System (http://www.pcengines.ch/) which is based on the
>>GEODE SC1100 and the i2c-nscacb.c driver from National. I saw, that
>>there were some discussions in this mailing list about this driver 6
>>months ago, but couldn't find further information about the support of
>>this Bus Driver. Is there already some work going on or is there a way
>>to contribute to enable this chip?
>>
>>Thanks in advance for any information!
>>Best Regards
>>Mirko
>>
>>BTW: How can I subscribe to this list?
>>
>>
>
>If you are using a 2.6 kernel then the scx200_acb driver is the one you
>need. The iscacb driver is obsolete. The lm87 driver then does the
>sensing.
>
>I am using it on several WRAP boards.
>
>David
>
>
