This is from Ticket #1972, Gigabyte 7dpxdw+, making it work correctly > the lm90 chip, driver, and userspace supports two temperatures. are you > saying that only one is reported or only one is correct? If only one is > reported check that the other is not set to ignore in /etc/sensors.conf. > If incorrect you can try adjusting with a compute line in sensors.conf. > If you need more help follow up by email, ref. your ticket number. > MDS 5/4/05 Sorry, I should have been more precise. This is a duallie board, so the LM90 needs to support TWO external temperatures, instead of the usual one, along with the usual on-the-chip sensor. That is what is so special (or odd) about this board. Here's a sensor output of what I have so far: ****** doug at ghidorah etc $ sensors w83627hf-isa-0290 Adapter: ISA adapter VCore 1: +1.52 V (min = +1.52 V, max = +1.68 V) ALARM VCore 2: +1.52 V (min = +1.52 V, max = +1.68 V) ALARM +3.3V: +3.10 V (min = +3.14 V, max = +3.47 V) +5V: +4.73 V (min = +4.76 V, max = +5.24 V) ALARM +12V: +11.49 V (min = +10.82 V, max = +13.19 V) -12V: -12.03 V (min = -13.18 V, max = -10.80 V) -5V: -5.05 V (min = -5.25 V, max = -4.75 V) V5SB: +5.35 V (min = +4.76 V, max = +5.24 V) VBat: +3.20 V (min = +2.40 V, max = +3.60 V) fan1: 0 RPM (min = 0 RPM, div = 2) fan2: 0 RPM (min = 0 RPM, div = 2) fan3: 0 RPM (min = 0 RPM, div = 2) temp1: +30 C (high = +127 C) sensor = thermistor temp2: +32.0 C (high = +127 C, hyst = +128 C) sensor = thermistor temp3: +37.5 C (high = +127 C, hyst = +128 C) sensor = thermistor vid: +1.600 V (VRM Version 9.0) alarms: Chassis intrusion detection ALARM beep_enable: Sound alarm disabled eeprom-i2c-1-53 Adapter: SMBus AMD768 adapter at 50e0 Memory type: DDR SDRAM DIMM Memory size (MB): 512 eeprom-i2c-1-52 Adapter: SMBus AMD768 adapter at 50e0 Memory type: DDR SDRAM DIMM Memory size (MB): 512 eeprom-i2c-1-51 Adapter: SMBus AMD768 adapter at 50e0 Memory type: DDR SDRAM DIMM Memory size (MB): 512 eeprom-i2c-1-50 Adapter: SMBus AMD768 adapter at 50e0 Memory type: DDR SDRAM DIMM Memory size (MB): 512 lm90-i2c-1-4c Adapter: SMBus AMD768 adapter at 50e0 M/B Temp: +49 C (low = +0 C, high = +70 C) CPU Temp: +81.2 C (low = +0.0 C, high = +70.0 C) ALARM M/B Crit: +85 C (hyst = +75 C) CPU Crit: +85 C (hyst = +75 C) Philips NTSC -i2c-0-61 Adapter: bt878 #0 [sw] tveeprom-i2c-0-50 Adapter: bt878 #0 [sw] ****** >From the w83627hf: the voltage readings are OK, the fan RPM readings are OK as none of my fans have tach lines and the 3 temp. readings are a mystery. They have nothing to do with the CPU temps. Skipping down to the lm90, I assume the M/B Temp is the "on-the-chip" sensor and the CPU temp is the one external temp reading that works. If I stall a CPU fan this reading will rise, so this one is good. Of course, it's way too high, but that's the way it shows in the BIOS and that's easy enough to fix anyway. The problem is that the lm90 should have one more external temp for the 2nd CPU. The website to this Windows program: http://mbm.livewiredev.com/ The motherboard list of the above website shows the GA7 DPXDW+ with a LM90-1 remote and a LM90-2 remote. Alas, the program is closed source so it's not much help. The author also quit supporting this program so I suppose emailing him and asking how he did it wouldn't be much help either. -- "Rights" is a fictional abstraction. No one has "Rights", neither machines nor flesh-and-blood. Persons... have opportunities, not rights, which they use or do not use. -- Lazarus Long