don't load i2c-viapro see http://mds.gotdns.com/localsensors/kernel26.html Konrad Chan wrote: > I apologize if this is a newbie mistake, but if you could give me some > pointers to get it working it would be greatly appreciated. > > Using SuSE Linux 9.2 Pro 32-bit > Linux blackhole 2.6.8-24.14-default #1 Tue Mar 29 09:27:43 UTC 2005 > i686 athlon i386 GNU/Linux > > Motherboard is MSI K7 Master MS-6341 > CPU is an AMD 1.2GHz with 1G mem > > Using lm_sensors version: > sensors version 2.9.1 with libsensors version 2.9.1 > > > Used sensors-detect, answered default to all questions and I followed > the following instructions: > > Added into /etc/modprobe.conf: > # I2C module options > alias char-major-89 i2c-dev > > Added into /etc/init.d/boot.local: > # I2C adapter drivers > modprobe i2c-viapro > modprobe i2c-isa > # I2C chip drivers > modprobe eeprom > modprobe via686a > # sleep 2 # optional > /usr/bin/sensors -s # recommended > > Copied etc/sensors.conf.eg to /etc/sensors.conf > > Rebooted. > > > However the only output I get from running "sensors" as root: > eeprom-i2c-0-51 > Adapter: SMBus Via Pro adapter at 5000 > Memory type: DDR SDRAM DIMM > Memory size (MB): 512 > > eeprom-i2c-0-50 > Adapter: SMBus Via Pro adapter at 5000 > Memory type: DDR SDRAM DIMM > Memory size (MB): 512 > > No temperature readings, voltage, etc. > > > dmesg output follows ... > Linux version 2.6.8-24.14-default (geeko at buildhost) (gcc version 3.3.4 > (pre 3.3.5 20040809)) #1 Tue Mar 29 09:27:43 UTC 2005 > BIOS-provided physical RAM map: > BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) > BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) > BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) > BIOS-e820: 0000000000100000 - 000000003fff0000 (usable) > BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS) > BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data) > BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved) > 128MB vmalloc/ioremap area available. > 127MB HIGHMEM available. > 896MB LOWMEM available. > On node 0 totalpages: 262128 > DMA zone: 4096 pages, LIFO batch:1 > Normal zone: 225280 pages, LIFO batch:16 > HighMem zone: 32752 pages, LIFO batch:7 > DMI 2.2 present. > ACPI: RSDP (v000 761686 ) @ 0x000f7320 > ACPI: RSDT (v001 761686 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000 > ACPI: FADT (v001 761686 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040 > ACPI: DSDT (v001 761686 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000 > ACPI: PM-Timer IO Port: 0x4008 > ACPI: local apic disabled > Built 1 zonelists > Kernel command line: root=/dev/hda2 vga=0x31a selinux=0 > resume=/dev/hda1 desktop elevator=as splash=silent > bootsplash: silent mode. > Initializing CPU#0 > PID hash table entries: 4096 (order: 12, 65536 bytes) > Detected 1208.479 MHz processor. > Using pmtmr for high-res timesource > Console: colour dummy device 80x25 > Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) > Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) > Memory: 1034088k/1048512k available (2076k kernel code, 13740k > reserved, 780k data, 212k init, 131008k highmem) > Checking if this processor honours the WP bit even in supervisor mode... Ok. > Calibrating delay loop... 2392.06 BogoMIPS (lpj=1196032) > Security Scaffold v1.0.0 initialized > SELinux: Disabled at boot. > Mount-cache hash table entries: 512 (order: 0, 4096 bytes) > CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 > CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000 > CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) > CPU: L2 Cache: 256K (64 bytes/line) > CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020 > Intel machine check architecture supported. > Intel machine check reporting enabled on CPU#0. > CPU: AMD Athlon(tm) processor stepping 02 > Enabling fast FPU save and restore... done. > Checking 'hlt' instruction... OK. > ACPI: Looking for DSDT in initrd... not found! > ACPI: IRQ9 SCI: Level Trigger. > checking if image is initramfs...it isn't (no cpio magic); looks like an initrd > Freeing initrd memory: 1178k freed > NET: Registered protocol family 16 > PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1 > PCI: Using configuration type 1 > mtrr: v2.0 (20020519) > ACPI: Subsystem revision 20040715 > ACPI: Interpreter enabled > ACPI: Using PIC for interrupt routing > ACPI: PCI Root Bridge [PCI0] (00:00) > PCI: Probing PCI hardware (bus 00) > ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] > ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15) > ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15) > ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15) > Linux Plug and Play Support v0.97 (c) Adam Belay > PCI: Using ACPI for IRQ routing > ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10 > ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 > ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10 > ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11 > ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11 > ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 > ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11 > ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11 > ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5 > ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 5 (level, low) -> IRQ 5 > TC classifier action (bugs to netdev at oss.sgi.com cc hadi at cyberus.ca) > apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac) > apm: overridden by ACPI. > audit: initializing netlink socket (disabled) > audit(1113785111.246:0): initialized > highmem bounce pool size: 64 pages > Total HugeTLB memory allocated, 0 > VFS: Disk quotas dquot_6.5.1 > Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) > Initializing Cryptographic API > PCI: Disabling Via external APIC routing > vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k, > total 16384k > vesafb: mode is 1280x1024x16, linelength=2560, pages=5 > vesafb: protected mode interface info at c000:5798 > vesafb: scrolling: redraw > vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0 > bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size > 47601 bytes,<6>...found (1280x1024, 24984 bytes, v3). > Console: switching to colour frame buffer device 158x57 > fb0: VESA VGA frame buffer device > isapnp: Scanning for PnP cards... > isapnp: No Plug & Play device found > Real Time Clock Driver v1.12 > serio: i8042 KBD port at 0x60,0x64 irq 1 > serio: i8042 AUX port at 0x60,0x64 irq 12 > Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled > ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A > ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A > Using anticipatory io scheduler > FDC 0 is a post-1991 82077 > RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize > loop: loaded (max 8 devices) > Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2 > ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx > VP_IDE: IDE controller at PCI slot 0000:00:07.1 > VP_IDE: chipset revision 6 > VP_IDE: not 100% native mode: will probe irqs later > VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1 > ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA > ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA > Probing IDE interface ide0... > hda: Maxtor 6E040L0, ATA DISK drive > hdb: IC35L120AVVA07-0, ATA DISK drive > ide0 at 0x1f0-0x1f7,0x3f6 on irq 14 > Probing IDE interface ide1... > hdc: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive > hdd: IC35L040AVVN07-0, ATA DISK drive > ide1 at 0x170-0x177,0x376 on irq 15 > Probing IDE interface ide2... > ide2: Wait for ready failed before probe ! > Probing IDE interface ide3... > ide3: Wait for ready failed before probe ! > Probing IDE interface ide4... > ide4: Wait for ready failed before probe ! > Probing IDE interface ide5... > ide5: Wait for ready failed before probe ! > hda: max request size: 128KiB > hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100) > hda: cache flushes supported > hda: hda1 hda2 hda3 > hdb: max request size: 128KiB > hdb: 234441648 sectors (120034 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) > hdb: cache flushes supported > hdb: hdb1 > hdd: max request size: 128KiB > hdd: 78156288 sectors (40016 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100) > hdd: cache flushes supported > hdd: hdd1 > ide-floppy driver 0.99.newide > mice: PS/2 mouse device common for all mice > input: AT Translated Set 2 keyboard on isa0060/serio0 > alps.c: E6 report: 0a 03 c8 > input: PS2++ Logitech Wheel Mouse on isa0060/serio1 > input: PC Speaker > md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27 > NET: Registered protocol family 2 > IP: routing cache hash table of 8192 buckets, 64Kbytes > TCP: Hash tables configured (established 262144 bind 65536) > NET: Registered protocol family 1 > NET: Registered protocol family 8 > NET: Registered protocol family 20 > PM: Reading pmdisk image. > swsusp: Resume From Partition: /dev/hda1 > <3>swsusp: Invalid partition type. > pmdisk: Error -22 resuming > PM: Resume from disk failed. > ACPI: (supports S0 S1 S4 S5) > ACPI wakeup devices: > SLPB PCI0 USB0 USB1 UAR1 > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > RAMDISK: Compressed image found at block 0 > VFS: Mounted root (ext2 filesystem). > ReiserFS: hda2: found reiserfs format "3.6" with standard journal > ReiserFS: hda2: using ordered data mode > reiserfs: using flush barriers > ReiserFS: hda2: journal params: device hda2, size 8192, journal first > block 18, max trans len 1024, max batch 900, max commit age 30, max > trans age 30 > ReiserFS: hda2: checking transaction log (hda2) > ReiserFS: hda2: Using r5 hash to sort names > VFS: Mounted root (reiserfs filesystem) readonly. > Trying to move old root to /initrd ... failed > Unmounting old root > Trying to free ramdisk memory ... okay > Freeing unused kernel memory: 212k freed > Adding 1052216k swap on /dev/hda1. Priority:42 extents:1 > reiserfs: enabling write barrier flush mode > usbcore: registered new driver usbfs > usbcore: registered new driver hub > Linux Tulip driver version 1.1.13-NAPI (May 11, 2002) > ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11 > tulip0: EEPROM default media type Autosense. > > *snip network non-MII errors* > > eth%d: Invalid media table selection 255. > tulip0: ***WARNING***: No MII transceiver found! > eth0: Macronix 98715 PMAC rev 37 at 0xc000, 00:80:C6:FE:37:CD, IRQ 11. > md: Autodetecting RAID arrays. > md: autorun ... > md: ... autorun DONE. > device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com > 8139too Fast Ethernet driver 0.9.27 > ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10 > eth1: RealTek RTL8139 at 0xf886a000, 00:50:ba:b0:8e:88, IRQ 10 > eth1: Identified 8139 chip type 'RTL-8139A' > evdev_connect: evdev c18f2740 handle c18f275c name event0 > evdev_connect: evdev c18f2640 handle c18f265c name event1 > evdev_connect: evdev c18f2540 handle c18f255c name event2 > parport0: PC-style at 0x378 [PCSPP,EPP] > parport_pc: Via 686A parallel port: io=0x378 > USB Universal Host Controller Interface driver v2.2 > ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10 > uhci_hcd 0000:00:07.2: UHCI Host Controller > uhci_hcd 0000:00:07.2: irq 10, io base 0000a800 > uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1 > usb usb1: Product: UHCI Host Controller > usb usb1: Manufacturer: Linux 2.6.8-24.14-default uhci_hcd > usb usb1: SerialNumber: 0000:00:07.2 > hub 1-0:1.0: USB hub found > hub 1-0:1.0: 2 ports detected > Linux agpgart interface v0.100 (c) Dave Jones > ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10 > uhci_hcd 0000:00:07.3: UHCI Host Controller > uhci_hcd 0000:00:07.3: irq 10, io base 0000ac00 > uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2 > usb usb2: Product: UHCI Host Controller > usb usb2: Manufacturer: Linux 2.6.8-24.14-default uhci_hcd > usb usb2: SerialNumber: 0000:00:07.3 > hub 2-0:1.0: USB hub found > hub 2-0:1.0: 2 ports detected > agpgart: Detected AMD 761 chipset > agpgart: Maximum main memory to use for agp memory: 941M > agpgart: AGP aperture is 128M @ 0xe0000000 > gameport: pci0000:00:0d.1 speed 1242 kHz > hdc: ATAPI 48X CD-ROM drive, 128kB Cache > Uniform CD-ROM driver Revision: 3.20 > SCSI subsystem initialized > st: Version 20040403, fixed bufsize 32768, s/g segs 256 > ReiserFS: hdb1: found reiserfs format "3.6" with standard journal > BIOS EDD facility v0.16 2004-Jun-25, 3 devices found > ReiserFS: hdb1: using ordered data mode > reiserfs: using flush barriers > ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first > block 18, max trans len 1024, max batch 900, max commit age 30, max > trans age 30 > ReiserFS: hdb1: checking transaction log (hdb1) > ReiserFS: hdb1: Using r5 hash to sort names > ReiserFS: hdd1: found reiserfs format "3.6" with standard journal > ReiserFS: hdd1: using ordered data mode > reiserfs: using flush barriers > ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first > block 18, max trans len 1024, max batch 900, max commit age 30, max > trans age 30 > ReiserFS: hdd1: checking transaction log (hdd1) > ReiserFS: hdd1: Using r5 hash to sort names > ReiserFS: hda3: found reiserfs format "3.6" with standard journal > ReiserFS: hda3: using ordered data mode > reiserfs: using flush barriers > ReiserFS: hda3: journal params: device hda3, size 8192, journal first > block 18, max trans len 1024, max batch 900, max commit age 30, max > trans age 30 > ReiserFS: hda3: checking transaction log (hda3) > ReiserFS: hda3: Using r5 hash to sort names > subfs 0.9 > NET: Registered protocol family 10 > Disabled Privacy Extensions on device c037f760(lo) > IPv6 over IPv4 tunneling driver > ip6_tables: (C) 2000-2002 Netfilter core team > ip_tables: (C) 2000-2002 Netfilter core team > ip_conntrack version 2.1 (8191 buckets, 65528 max) - 336 bytes per conntrack > ip6_conntrack version 0.1 (8191 buckets, 65528 max) - 208 bytes per conntrack > NET: Registered protocol family 17 > eth1: link up, 100Mbps, full-duplex, lpa 0x41E1 > Disabled Privacy Extensions on device f7d84400(sit0) > eth0: no IPv6 routers present > eth1: no IPv6 routers present > martian source 192.168.0.111 from 192.168.0.102, on dev eth0 > ll header: 00:80:c6:fe:37:cd:00:0c:f1:06:c4:dc:08:00 > martian source 192.168.0.111 from 192.168.0.102, on dev eth0 > ll header: 00:80:c6:fe:37:cd:00:0c:f1:06:c4:dc:08:00 > ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11 > ACPI: Power Button (FF) [PWRF] > ACPI: Sleep Button (CM) [SLPB] > ACPI: Processor [CPU0] (supports C1, 2 throttling states) > > *snip network martian source errors* > > > Thanks, let me know if this is sufficient.
