I apologize if this is a newbie mistake, but if you could give me some
pointers to get it working it would be greatly appreciated.
Using SuSE Linux 9.2 Pro 32-bit
Linux blackhole 2.6.8-24.14-default #1 Tue Mar 29 09:27:43 UTC 2005
i686 athlon i386 GNU/Linux
Motherboard is MSI K7 Master MS-6341
CPU is an AMD 1.2GHz with 1G mem
Using lm_sensors version:
sensors version 2.9.1 with libsensors version 2.9.1
Used sensors-detect, answered default to all questions and I followed
the following instructions:
Added into /etc/modprobe.conf:
# I2C module options
alias char-major-89 i2c-dev
Added into /etc/init.d/boot.local:
# I2C adapter drivers
modprobe i2c-viapro
modprobe i2c-isa
# I2C chip drivers
modprobe eeprom
modprobe via686a
# sleep 2 # optional
/usr/bin/sensors -s # recommended
Copied etc/sensors.conf.eg to /etc/sensors.conf
Rebooted.
However the only output I get from running "sensors" as root:
eeprom-i2c-0-51
Adapter: SMBus Via Pro adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
eeprom-i2c-0-50
Adapter: SMBus Via Pro adapter at 5000
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
No temperature readings, voltage, etc.
dmesg output follows ...
Linux version 2.6.8-24.14-default (geeko at buildhost) (gcc version 3.3.4
(pre 3.3.5 20040809)) #1 Tue Mar 29 09:27:43 UTC 2005
BIOS-provided physical RAM map:
BIOS-e820: 0000000000000000 - 000000000009fc00 (usable)
BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved)
BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved)
BIOS-e820: 0000000000100000 - 000000003fff0000 (usable)
BIOS-e820: 000000003fff0000 - 000000003fff3000 (ACPI NVS)
BIOS-e820: 000000003fff3000 - 0000000040000000 (ACPI data)
BIOS-e820: 00000000ffff0000 - 0000000100000000 (reserved)
128MB vmalloc/ioremap area available.
127MB HIGHMEM available.
896MB LOWMEM available.
On node 0 totalpages: 262128
DMA zone: 4096 pages, LIFO batch:1
Normal zone: 225280 pages, LIFO batch:16
HighMem zone: 32752 pages, LIFO batch:7
DMI 2.2 present.
ACPI: RSDP (v000 761686 ) @ 0x000f7320
ACPI: RSDT (v001 761686 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3000
ACPI: FADT (v001 761686 MSI ACPI 0x42302e31 AWRD 0x00000000) @ 0x3fff3040
ACPI: DSDT (v001 761686 AWRDACPI 0x00001000 MSFT 0x0100000c) @ 0x00000000
ACPI: PM-Timer IO Port: 0x4008
ACPI: local apic disabled
Built 1 zonelists
Kernel command line: root=/dev/hda2 vga=0x31a selinux=0
resume=/dev/hda1 desktop elevator=as splash=silent
bootsplash: silent mode.
Initializing CPU#0
PID hash table entries: 4096 (order: 12, 65536 bytes)
Detected 1208.479 MHz processor.
Using pmtmr for high-res timesource
Console: colour dummy device 80x25
Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
Memory: 1034088k/1048512k available (2076k kernel code, 13740k
reserved, 780k data, 212k init, 131008k highmem)
Checking if this processor honours the WP bit even in supervisor mode... Ok.
Calibrating delay loop... 2392.06 BogoMIPS (lpj=1196032)
Security Scaffold v1.0.0 initialized
SELinux: Disabled at boot.
Mount-cache hash table entries: 512 (order: 0, 4096 bytes)
CPU: After generic identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: After vendor identify, caps: 0183f9ff c1c7f9ff 00000000 00000000
CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line)
CPU: L2 Cache: 256K (64 bytes/line)
CPU: After all inits, caps: 0183f9ff c1c7f9ff 00000000 00000020
Intel machine check architecture supported.
Intel machine check reporting enabled on CPU#0.
CPU: AMD Athlon(tm) processor stepping 02
Enabling fast FPU save and restore... done.
Checking 'hlt' instruction... OK.
ACPI: Looking for DSDT in initrd... not found!
ACPI: IRQ9 SCI: Level Trigger.
checking if image is initramfs...it isn't (no cpio magic); looks like an initrd
Freeing initrd memory: 1178k freed
NET: Registered protocol family 16
PCI: PCI BIOS revision 2.10 entry at 0xfb2d0, last bus=1
PCI: Using configuration type 1
mtrr: v2.0 (20020519)
ACPI: Subsystem revision 20040715
ACPI: Interpreter enabled
ACPI: Using PIC for interrupt routing
ACPI: PCI Root Bridge [PCI0] (00:00)
PCI: Probing PCI hardware (bus 00)
ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 *5 6 7 10 11 12 14 15)
ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 *11 12 14 15)
ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *10 11 12 14 15)
Linux Plug and Play Support v0.97 (c) Adam Belay
PCI: Using ACPI for IRQ routing
ACPI: PCI Interrupt Link [LNKD] enabled at IRQ 10
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
ACPI: PCI Interrupt Link [LNKA] enabled at IRQ 11
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 5
ACPI: PCI interrupt 0000:01:05.0[A] -> GSI 5 (level, low) -> IRQ 5
TC classifier action (bugs to netdev at oss.sgi.com cc hadi at cyberus.ca)
apm: BIOS version 1.2 Flags 0x07 (Driver version 1.16ac)
apm: overridden by ACPI.
audit: initializing netlink socket (disabled)
audit(1113785111.246:0): initialized
highmem bounce pool size: 64 pages
Total HugeTLB memory allocated, 0
VFS: Disk quotas dquot_6.5.1
Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
Initializing Cryptographic API
PCI: Disabling Via external APIC routing
vesafb: framebuffer at 0xd0000000, mapped to 0xf8880000, using 10240k,
total 16384k
vesafb: mode is 1280x1024x16, linelength=2560, pages=5
vesafb: protected mode interface info at c000:5798
vesafb: scrolling: redraw
vesafb: Truecolor: size=0:5:6:5, shift=0:11:5:0
bootsplash 3.1.6-2004/03/31: looking for picture...<6> silentjpeg size
47601 bytes,<6>...found (1280x1024, 24984 bytes, v3).
Console: switching to colour frame buffer device 158x57
fb0: VESA VGA frame buffer device
isapnp: Scanning for PnP cards...
isapnp: No Plug & Play device found
Real Time Clock Driver v1.12
serio: i8042 KBD port at 0x60,0x64 irq 1
serio: i8042 AUX port at 0x60,0x64 irq 12
Serial: 8250/16550 driver $Revision: 1.90 $ 48 ports, IRQ sharing enabled
ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
Using anticipatory io scheduler
FDC 0 is a post-1991 82077
RAMDISK driver initialized: 16 RAM disks of 64000K size 1024 blocksize
loop: loaded (max 8 devices)
Uniform Multi-Platform E-IDE driver Revision: 7.00alpha2
ide: Assuming 33MHz system bus speed for PIO modes; override with idebus=xx
VP_IDE: IDE controller at PCI slot 0000:00:07.1
VP_IDE: chipset revision 6
VP_IDE: not 100% native mode: will probe irqs later
VP_IDE: VIA vt82c686b (rev 40) IDE UDMA100 controller on pci0000:00:07.1
ide0: BM-DMA at 0xa400-0xa407, BIOS settings: hda:DMA, hdb:DMA
ide1: BM-DMA at 0xa408-0xa40f, BIOS settings: hdc:DMA, hdd:DMA
Probing IDE interface ide0...
hda: Maxtor 6E040L0, ATA DISK drive
hdb: IC35L120AVVA07-0, ATA DISK drive
ide0 at 0x1f0-0x1f7,0x3f6 on irq 14
Probing IDE interface ide1...
hdc: LG CD-ROM CRD-8484B, ATAPI CD/DVD-ROM drive
hdd: IC35L040AVVN07-0, ATA DISK drive
ide1 at 0x170-0x177,0x376 on irq 15
Probing IDE interface ide2...
ide2: Wait for ready failed before probe !
Probing IDE interface ide3...
ide3: Wait for ready failed before probe !
Probing IDE interface ide4...
ide4: Wait for ready failed before probe !
Probing IDE interface ide5...
ide5: Wait for ready failed before probe !
hda: max request size: 128KiB
hda: 78156288 sectors (40016 MB) w/2048KiB Cache, CHS=65535/16/63, UDMA(100)
hda: cache flushes supported
hda: hda1 hda2 hda3
hdb: max request size: 128KiB
hdb: 234441648 sectors (120034 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hdb: cache flushes supported
hdb: hdb1
hdd: max request size: 128KiB
hdd: 78156288 sectors (40016 MB) w/1863KiB Cache, CHS=65535/16/63, UDMA(100)
hdd: cache flushes supported
hdd: hdd1
ide-floppy driver 0.99.newide
mice: PS/2 mouse device common for all mice
input: AT Translated Set 2 keyboard on isa0060/serio0
alps.c: E6 report: 0a 03 c8
input: PS2++ Logitech Wheel Mouse on isa0060/serio1
input: PC Speaker
md: md driver 0.90.0 MAX_MD_DEVS=256, MD_SB_DISKS=27
NET: Registered protocol family 2
IP: routing cache hash table of 8192 buckets, 64Kbytes
TCP: Hash tables configured (established 262144 bind 65536)
NET: Registered protocol family 1
NET: Registered protocol family 8
NET: Registered protocol family 20
PM: Reading pmdisk image.
swsusp: Resume From Partition: /dev/hda1
<3>swsusp: Invalid partition type.
pmdisk: Error -22 resuming
PM: Resume from disk failed.
ACPI: (supports S0 S1 S4 S5)
ACPI wakeup devices:
SLPB PCI0 USB0 USB1 UAR1
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
RAMDISK: Compressed image found at block 0
VFS: Mounted root (ext2 filesystem).
ReiserFS: hda2: found reiserfs format "3.6" with standard journal
ReiserFS: hda2: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda2: journal params: device hda2, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda2: checking transaction log (hda2)
ReiserFS: hda2: Using r5 hash to sort names
VFS: Mounted root (reiserfs filesystem) readonly.
Trying to move old root to /initrd ... failed
Unmounting old root
Trying to free ramdisk memory ... okay
Freeing unused kernel memory: 212k freed
Adding 1052216k swap on /dev/hda1. Priority:42 extents:1
reiserfs: enabling write barrier flush mode
usbcore: registered new driver usbfs
usbcore: registered new driver hub
Linux Tulip driver version 1.1.13-NAPI (May 11, 2002)
ACPI: PCI interrupt 0000:00:0b.0[A] -> GSI 11 (level, low) -> IRQ 11
tulip0: EEPROM default media type Autosense.
*snip network non-MII errors*
eth%d: Invalid media table selection 255.
tulip0: ***WARNING***: No MII transceiver found!
eth0: Macronix 98715 PMAC rev 37 at 0xc000, 00:80:C6:FE:37:CD, IRQ 11.
md: Autodetecting RAID arrays.
md: autorun ...
md: ... autorun DONE.
device-mapper: 4.1.0-ioctl (2003-12-10) initialised: dm at uk.sistina.com
8139too Fast Ethernet driver 0.9.27
ACPI: PCI interrupt 0000:00:0c.0[A] -> GSI 10 (level, low) -> IRQ 10
eth1: RealTek RTL8139 at 0xf886a000, 00:50:ba:b0:8e:88, IRQ 10
eth1: Identified 8139 chip type 'RTL-8139A'
evdev_connect: evdev c18f2740 handle c18f275c name event0
evdev_connect: evdev c18f2640 handle c18f265c name event1
evdev_connect: evdev c18f2540 handle c18f255c name event2
parport0: PC-style at 0x378 [PCSPP,EPP]
parport_pc: Via 686A parallel port: io=0x378
USB Universal Host Controller Interface driver v2.2
ACPI: PCI interrupt 0000:00:07.2[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.2: UHCI Host Controller
uhci_hcd 0000:00:07.2: irq 10, io base 0000a800
uhci_hcd 0000:00:07.2: new USB bus registered, assigned bus number 1
usb usb1: Product: UHCI Host Controller
usb usb1: Manufacturer: Linux 2.6.8-24.14-default uhci_hcd
usb usb1: SerialNumber: 0000:00:07.2
hub 1-0:1.0: USB hub found
hub 1-0:1.0: 2 ports detected
Linux agpgart interface v0.100 (c) Dave Jones
ACPI: PCI interrupt 0000:00:07.3[D] -> GSI 10 (level, low) -> IRQ 10
uhci_hcd 0000:00:07.3: UHCI Host Controller
uhci_hcd 0000:00:07.3: irq 10, io base 0000ac00
uhci_hcd 0000:00:07.3: new USB bus registered, assigned bus number 2
usb usb2: Product: UHCI Host Controller
usb usb2: Manufacturer: Linux 2.6.8-24.14-default uhci_hcd
usb usb2: SerialNumber: 0000:00:07.3
hub 2-0:1.0: USB hub found
hub 2-0:1.0: 2 ports detected
agpgart: Detected AMD 761 chipset
agpgart: Maximum main memory to use for agp memory: 941M
agpgart: AGP aperture is 128M @ 0xe0000000
gameport: pci0000:00:0d.1 speed 1242 kHz
hdc: ATAPI 48X CD-ROM drive, 128kB Cache
Uniform CD-ROM driver Revision: 3.20
SCSI subsystem initialized
st: Version 20040403, fixed bufsize 32768, s/g segs 256
ReiserFS: hdb1: found reiserfs format "3.6" with standard journal
BIOS EDD facility v0.16 2004-Jun-25, 3 devices found
ReiserFS: hdb1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdb1: journal params: device hdb1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hdb1: checking transaction log (hdb1)
ReiserFS: hdb1: Using r5 hash to sort names
ReiserFS: hdd1: found reiserfs format "3.6" with standard journal
ReiserFS: hdd1: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hdd1: journal params: device hdd1, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hdd1: checking transaction log (hdd1)
ReiserFS: hdd1: Using r5 hash to sort names
ReiserFS: hda3: found reiserfs format "3.6" with standard journal
ReiserFS: hda3: using ordered data mode
reiserfs: using flush barriers
ReiserFS: hda3: journal params: device hda3, size 8192, journal first
block 18, max trans len 1024, max batch 900, max commit age 30, max
trans age 30
ReiserFS: hda3: checking transaction log (hda3)
ReiserFS: hda3: Using r5 hash to sort names
subfs 0.9
NET: Registered protocol family 10
Disabled Privacy Extensions on device c037f760(lo)
IPv6 over IPv4 tunneling driver
ip6_tables: (C) 2000-2002 Netfilter core team
ip_tables: (C) 2000-2002 Netfilter core team
ip_conntrack version 2.1 (8191 buckets, 65528 max) - 336 bytes per conntrack
ip6_conntrack version 0.1 (8191 buckets, 65528 max) - 208 bytes per conntrack
NET: Registered protocol family 17
eth1: link up, 100Mbps, full-duplex, lpa 0x41E1
Disabled Privacy Extensions on device f7d84400(sit0)
eth0: no IPv6 routers present
eth1: no IPv6 routers present
martian source 192.168.0.111 from 192.168.0.102, on dev eth0
ll header: 00:80:c6:fe:37:cd:00:0c:f1:06:c4:dc:08:00
martian source 192.168.0.111 from 192.168.0.102, on dev eth0
ll header: 00:80:c6:fe:37:cd:00:0c:f1:06:c4:dc:08:00
ACPI: PCI interrupt 0000:00:0d.0[A] -> GSI 11 (level, low) -> IRQ 11
ACPI: Power Button (FF) [PWRF]
ACPI: Sleep Button (CM) [SLPB]
ACPI: Processor [CPU0] (supports C1, 2 throttling states)
*snip network martian source errors*
Thanks, let me know if this is sufficient.
--
Konrad Chan, konradc at gmail.com
