Dear Jean, Rudolf As to the problem we meet on the ASUS NCLV-D motherboard when testing w83792d driver under linux-2.4, we solve it with your help by writing the value "0x08" in "0x04b9", and unloading the eeprom modules. I have two questions here: (1) As we know, it will be very inconvenient for those users with ASUS NCLV-D motherboard and want to use w83792d driver under linux-2.4, if they have to write the value "0x08" into "0x04b9" by themselves each time. So I wonder whether the related bus driver has been modified so that users can use w83792d driver easily? Will the coming lm_sensors-2.9.1 fix it? (2) How about the problem of uploading eeprom? Need uses have to upload the eeprom by themselves? Or this problem also has been fixed? Thanks Best Regards Chunhao 2005-05-26 > -----Original Message----- > From: PI14 HUANG0 > Sent: 2005??3??7?? 10:07 > To: 'Rudolf Marek'; 'Jean Delvare' > Cc: PI10 LHHsu; PI14 DZSHEN; PI13 CFLi; sensors at Stimpy.netroedge.com > Subject: RE: Fw: Ask for some information about motherboard ASUS NCLV-D > > Dear Rudolf, Jean > > > I have a solution. Block reads to eeprom are locking the bus. > > Please use CVS version of lm_sensors or do NOT load eeprom module. > > Then it should work. Please note you need to do the isaset trick. > > I will work on quirk.c to kernel this weekend. > > Good, after I unload the eeprom, the 792 driver can work now. Thanks > a lot. > > > > Yes I have one question. They advise to write to port all 8 bits. > > More clear solution would be to modify the bits that are "in the game" > > So my question is: > > What bit(s) exactly in that port need(s) to be modified? > > We simply like clean solutions. > > I have forwarded this question to ASUS, when I get the answer, I will > forward you. > > > > Also here patch for 2.6 kernels it should do the isaset automatically. > > It can be applied to 2.6.10 or 2.6.11 > > I will use the patch in the future, because we do NOT have a linux-2.6 > environment on this motherboard, and the 792 driver for linux-2.6 is still > under my development. I will use it when we start to test 792 driver for > linux-2.6, thanks. :-) > > Best Regards > > Chunhao > 2005-03-07 ===========================================================================================The privileged confidential information contained in this email is intended for use only by the addressees as indicated by the original author of this email. If you are not the addressee indicated in this email or are not responsible for delivery of the email to such person, please kindly reply the sender indicating accordingly and delete all copies of it from your computer and network server immediately. We thank you for your cooperation. It is advisable that any unauthorized use of confidential information of Winbond is strictly prohibited; and any information in this email that does not relate to the official business of Winbond shall be deemed as neither given nor endorsed by Winbond.===========================================================================================If your computer is unable to decode Chinese font, please ignore the following message. They essentially repea! t the English statement above.???H???????t?????q?l???]???????K?????T, ?????v???o?H?H???w?????H?H???\????. ?????z???D?Q???w?????H?H???]???????]?b???g???v?????????U???????H??, ???z?i?????o?H?H?????Y?N?H???q?q???P???????A???????H????. ?????z???X?@, ?????????P??. ?S??????, ???????g???v?????????????q?l?????K???T???????O?Q?Y???T????. ?H???P?????q?l???~?L???????e,???o?????????q?l?????????N??.
