Greetings, Still learning lm_sensors interface, am porting adm9240 to 2.6. This chip has an analog output which is rare these days, plus an output to send a reset pulse (open drain I/O) to an external latch for Chassis Intrusion (CI). Wrinkle with CI clear function is there are two register/bit locations for doing the deed. I really would welcome ideas on how to incorporate these to the sysfs interface, offering this patch as a starting point. I may have missed a miscellaneous control interface somewhere? In that case pointers to docs appreciated. Cheers, Grant. --- linux-2.6.11-mm2-p2x/Documentation/i2c/sysfs-interface.orig 2004-12-25 08:34:01.000000000 +1100 +++ linux-2.6.11-mm2-p2x/Documentation/i2c/sysfs-interface 2005-03-12 12:48:10.000000000 +1100 @@ -272,3 +272,12 @@ eeprom Raw EEPROM data in binary form. Read only. + +analog_out mV analog output voltage + Read/Write. + +clear_ci[1-2] Tell chip to output a pulse to reset external Chassis + Intrusion latch, there are two methods for doing this + using a different register.bit + Write Only. +
