Hi Mark, On Sunday 06 February 2005 20:58, Mark M. Hoffman wrote: > > * Rik Ryall <wik at blueyonder.co.uk> [2005-02-02 20:21:06 +0000]: > > I'm running Suse 9.2 Pro with a 2.6.8 kernel (2.6.8-24.11-smp to be > > precise) and whilst I've made /some/ progress with getting sensors to > > work, I seem to be getting less positive results than I did on my > > previous 2.4-based build. > > Looks like Jean already helped you to get the right versions. > > I have the very same mainboard, and here's my sensors(1) output: > (Note: I have an external temperature probe on temp3, you may want to > ignore) > > w83627thf-isa-0290 [snip] Many thanks to you both for helping me out. I'd managed to get pretty much the sensors.conf you have (albeit not as tidy!) by trial, error, reading and re-reading the docs and not a little bit of coaching from Jean. Having your code has helped to validate my workings thus far for which I'm very grateful. I'm still stuck with duff vid data as I can't currently compile lm_sensors -- GNU Make 3.80 stops when doing a "make user" with the following gripe: make: *** No rule to make target > > `/lib/modules/2.6.8-24.11-smp/build/include/linux/modversions.h', > > needed by ?`kernel/chips/xeontemp.d'. ?Stop. And it's got me stumped. Jean did suggest I stop by the irc channel but I've simply not had the time, yet. Meanwhile, my voltages are a way off 'cause of the vid problem but the temps and fan speeds have been nailed, so, my glass is half full. :-) Thanks for now. Rik.
