Hiya,
I'm something of a noob to Linux (only two years...) so please bear with
me. :-)
I'm running Suse 9.2 Pro with a 2.6.8 kernel (2.6.8-24.11-smp to be precise)
and whilst I've made /some/ progress with getting sensors to work, I seem to
be getting less positive results than I did on my previous 2.4-based build.
I'm getting it to see the sensor and it's giving some interesting figures
despite tweaking and twiddling sensors.conf until I've gone cross-eyed.
I /think/ that CPU temp figure is a tad low and suspect it to be the mobo
temp.
I've tried issuing the "force_w83627thf:" parm when loading the module,
however, I'm unsure of the array parms that should follow.
Also, despite setting the vid parm to 9.0, 9.1 and 10.0, I still can't get rid
of the error...
Am I being overly thick?
Many thanks,
Rik.
poochzilla:/etc # sensors
w83627thf-isa-0290
Adapter: ISA adapter
VCore: +0.82 V (min = +0.96 V, max = +0.96 V)
+12V: +12.10 V (min = +10.82 V, max = +13.19 V)
+3.3V: +3.33 V (min = +3.14 V, max = +3.47 V)
+5V: +4.99 V (min = +4.75 V, max = +5.25 V)
-12V: -14.91 V (min = -10.80 V, max = -13.18 V)
V5SB: +5.08 V (min = +4.76 V, max = +5.24 V)
VBat: +0.00 V (min = +2.40 V, max = +3.60 V)
fan1: 0 RPM (min = 5273 RPM, div = 32)
CPU Fan: 0 RPM (min = -1 RPM, div = 2)
fan3: 1430 RPM (min = -1 RPM, div = 8)
M/B Temp: +125?C (high = +0?C, hyst = +0?C) sensor = PII/Celeron
diode
CPU Temp: +26.0?C (high = +80?C, hyst = +75?C) sensor = PII/Celeron
diode
temp3: -48.0?C (high = +80?C, hyst = +75?C) sensor = thermistor
ERROR: Can't get VID data!
alarms:
beep_enable:
Sound alarm disabled
eeprom-i2c-0-52
Adapter: SMBus I801 adapter at 0400
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
eeprom-i2c-0-50
Adapter: SMBus I801 adapter at 0400
Memory type: DDR SDRAM DIMM
Memory size (MB): 512
