Jean Delvare wrote: >Hi Tiago, > > > >>Hi, i just upgraded to a MSI 915p neo2 , that has the winbond >>w83627thf. >>kernel: 2.6.10-gentoo-r4 >>lm_sensors: 2.9.0 >> >>with the w83627hf driver in the kernel when i tried to insert the >>module i would always get "no such device", >>after looking for the problem i found this patch >>"http://archives.andrew.net.au/lm-sensors/msg28713.html"; and applied >>it. the module now loads but i still get the "no sensors found!" from >>sensors prog. >> >>here is the lsmod output: >>w83627hf 29352 0 >>i2c_isa 2304 0 >>i2c_algo_pcf 7172 0 >>i2c_algo_pca 6276 0 >>i2c_algo_bit 10120 0 >>i2c_sensor 4480 1 w83627hf >>i2c_i801 11148 0 >> >> > >Looks all OK to me (except that you most likely don't really need any of >the algorithm drivers.) > >I suspect that you have the same problem as reported here: >http://lkml.org/lkml/2005/1/7/351 >and here: >http://bugzilla.kernel.org/show_bug.cgi?id=4014 > >Please check in /proc/ioports if the 0x295-0x296 range is reserved by >pnp. If it is, you would have to remove "Plug and Play ACPI support" >from your kernel and then sensors should be working again. > > > Hi Jean, that solved it. thanks, Tiago Rodrigues.
