Hi Tiago, > Hi, i just upgraded to a MSI 915p neo2 , that has the winbond > w83627thf. > kernel: 2.6.10-gentoo-r4 > lm_sensors: 2.9.0 > > with the w83627hf driver in the kernel when i tried to insert the > module i would always get "no such device", > after looking for the problem i found this patch > "http://archives.andrew.net.au/lm-sensors/msg28713.html"; and applied > it. the module now loads but i still get the "no sensors found!" from > sensors prog. > > here is the lsmod output: > w83627hf 29352 0 > i2c_isa 2304 0 > i2c_algo_pcf 7172 0 > i2c_algo_pca 6276 0 > i2c_algo_bit 10120 0 > i2c_sensor 4480 1 w83627hf > i2c_i801 11148 0 Looks all OK to me (except that you most likely don't really need any of the algorithm drivers.) I suspect that you have the same problem as reported here: http://lkml.org/lkml/2005/1/7/351 and here: http://bugzilla.kernel.org/show_bug.cgi?id=4014 Please check in /proc/ioports if the 0x295-0x296 range is reserved by pnp. If it is, you would have to remove "Plug and Play ACPI support" from your kernel and then sensors should be working again. -- Jean Delvare http://khali.linux-fr.org/
