Hey,
Jean,
I'm doing it now, but is it supposed to do this
[root at bambi ~]# isaset -y -f 0x2e 0x87
Data mismatch, wrote 0x87, read 0xff back.
[root at bambi ~]# isaset -y -f 0x2e 0x87
Data mismatch, wrote 0x87, read 0xff back.
Well here's the dump anyway (you sure 0x2e is the right location?)
[root at bambi ~]# isaset -y -f 0x2e 0xaa
Data mismatch, wrote 0xaa, read 0xff back.
Mark.
ps Its a fair sized surface mount, it would take a bit of effort to
unsolder it, so as you say I think the isadump tool is the best bet :)
On Thu, 2005-01-13 at 20:42 +0100, Jean Delvare wrote:
> Hi Mark,
>
> Could you please provide a dump of logical device 8 or your W83627THF
> chip?
>
> isaset -y -f 0x2e 0x87
> isaset -y -f 0x2e 0x87
> isadump -y 0x2e 0x2f 8 > w83627thf-ld8.dump
> isaset -y -f 0x2e 0xaa
>
> Thanks,
-------------- next part --------------
0 1 2 3 4 5 6 7 8 9 a b c d e f
00: ff ff ff ff ff ff ff 08 ff ff ff ff ff ff ff ff
10: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
20: 82 84 ff fe e2 00 00 ff 20 00 00 1a 58 20 00 ff
30: 00 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
40: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff
