Jean Delvare wrote: >>I tried the patch with a Dell Optiplex GX110. The module loads, finds >>a device at 0x09, but says it's "not activated". What do you need to >>debug this problem? > > > You mean, what do *you* need to work around it? ;) Yeah, that's what I meant. > > Typically, disabled devices mean that the monitoring device is not wired > properly (the motherboard manufacturer didn't make use of the > functionality). Thus, the driver has not been educated to forcibly > enable the device. Well the BIOS has temp., voltage and fan readings, and there are no other sensor chips on the board. > > You may still want to try to manually enable it, and see if the driver > then reports anything useful. The commands to do that are (in order): > > isaset 0x2e 0x2f 7 9 > isaset 0x2e 0x2f 0x30 1 1 What is the last trailing one for? Now, the modprobe command gives: pc87360: Base address not set for device 0x09 > > Then loading the driver should work. Whether or not you will find it > useful on your board, you tell us. -- Jeremy Jackson Coplanar Networks (519)897-1516 http://www.coplanar.net
