On Mon, Aug 02, 2004 at 10:27:53AM +0100, Ian Campbell wrote: > Greg, Sensors, > > Attached is a driver for the PCA9564 "Parallel to I2C" chip, it is > similar in principle to the PCF8584 which is supported by the > i2c-algo-pcf and i2c-elektor code, however it's not code compatible in > any way: http://www.semiconductors.philips.com/pip/PCA9564PW.html > > The patch contains the PCA algorithm driver and a bus driver for an ISA > card. It only supports master send and receive but I'm not sure that the > Linux i2c stack supports client side operation anyhow, and I have no > hardware to test on. > > It was tested on a PC104 card containing the PCA chip and an Atmel TPM > device and also on a separate PC104 card with a DS1307 RTC hotwired onto > it for testing purposes. > > The driver is against a 2.6 BK tree pulled on Friday. I also have a > fairly trivial 2.4 backport if that is of interest. Looks good, I've applied this to my trees, and will send it off to Linus after 2.6.8 is out. thanks, greg k-h
