* Jean Delvare <khali at linux-fr.org> [2004-07-08 21:06:15 +0200]: > > Bad news: I up'd to 1.334 of sensors-detect and 1.48 of lm75.c... now > > my two lm75s are not detected by the script nor by the driver. > > > > Here's what I guess happened: earlier, when you asked me to test, I > > unloaded all the i2c/sensors drivers, rebuilt and tested; you saw > > the results. Now when I tested again tonight, it's the first try > > since a reboot. > > > > Certainly, I can't believe that the changes between 1.332 and 1.334 of > > sensors-detect should affect me w.r.t. the lm75s. > > > > I apologize for the mixup; from now on I'll be sure to test following > > a fresh reboot as well as re-inserting the modules. Here are the > > dumps immediately following a reboot for two lm75s. Let me know if > > there's anything else I can provide. > > OK, simply looks like we cannot assume anything about the lower > temperature bits. I removed the check for them. I *guess* that they are > either all 1's or all 0's but since we are not certain... > > Please test lm75.c and sensors-detect from CVS. If it fixed the problem > for you I'll send an update to Greg for 2.6. OK, works now... following fresh reboot and also after modprobe/rmmod cycle. Thanks and regards, -- Mark M. Hoffman mhoffman at lightlink.com
