Thanks for the info, regards, Dan On Mon, 2004-06-28 at 03:55, Jean Delvare wrote: > Hi Daniel, > > Including Freitas as well since you seem to share interests. > > > just wondering the approximate timeframe for ADM 1025 support on the > > 2.6 kernel. > > I just finised my port, sorry for the delay. You can get it here: > http://khali.linux-fr.org/devel/i2c/linux-2.6/ > > Either apply the adm1031 and adm1025 patches in order (I don't think the > adm1025 patch alone will apply cleanly) or the unified > linux-2.6.7-i2c.patch.gz, to any 2.6.7+ kernel. > > You will need lm_sensors CVS for user-space tools for full support. If > you have an older version (but at least 2.8.5) it should still work, > you'll only miss the VID value in "sensors". > > I'm particularly interested in feedback concerning VID value. As you may > know, the ADM1025 chip may either monitor +12V and have 4-bit VID > values, or have 5-bit VID values. In the first case, I'm not sure of the > value to give to the missing bit. The driver and datasheet suggest 0, > but another doc I found about Pentium Pro (which is the target CPU for > the ADM1025 according to the datasheet) suggests 1. That's not something > I can verify on my evaluation board, of course, since it has no CPU. > > Let me know how it works for you! > > > Thanks for the great sw. > > Thanks :)
