On Sat, May 22, 2004 at 10:53:24PM +0200, Jean Delvare wrote: > Hi Greg, > > The following patch adds support for the ADM1030 and ADM1031 evaluation > boards to the i2c-parport and i2c-parport-light drivers. They are almost > compatible with the already supported ADM1025 and ADM1032 boards, except > that the ADM1032 board needs some pins to be set high to draw its power, > while the same pins power up heating resistors on the ADM1031 board. I > considered it was a bit dangerous to do that by default, so I ended up > with two different device definitions, one with powering pins set, and > one with these pins cleared. > > Please apply, Applied, thanks. greg k-h
