The sample config entry is in doc/chips/lm85... :v) Jean Delvare wrote: >>I built all from source and it seems to work fine :) >> >> > >Great :) > > > >>lm85b-i2c-0-2e >>Adapter: SMBus I801 adapter at efa0 >>in0: +1.52 V (min = +0.00 V, max = +3.32 V) >>in1: +1.50 V (min = +0.00 V, max = +2.99 V) >>in2: +3.32 V (min = +0.00 V, max = +4.38 V) >>in3: +5.21 V (min = +0.00 V, max = +6.64 V) >>in4: +11.94 V (min = +0.00 V, max = +15.94 V) >>fan1: 4825 RPM (min = 0 RPM) >>fan2: 0 RPM (min = 0 RPM) >>fan3: 0 RPM (min = 0 RPM) >>fan4: 0 RPM (min = 0 RPM) >>temp1: +28 C (low = -127 C, high = +127 C) >>temp2: +23 C (low = -127 C, high = +127 C) >>temp3: +23 C (low = -127 C, high = +127 C) >>pwm1: 255 >>pwm2: 255 >>pwm3: 255 >>vid: +1.525 V (VRM Version 9.1) >> >>Any idea where to find a translation of in0, in1, fan1, >>pwm1 etc ? >> >> > >I'm actually astonished that they are not in sensors.conf.eg. Philip, >care to provide a sample configuration section for lm85 and clones? > >Wild guess: >in0 == Vcore1 >in1 == Vcore2 >in2 == +3.3V >in3 == +5V >in4 == +12V >fan1 == CPU Fan >temp1 == CPU Temp >temp2 & temp3 == Case Temp > >Just guessing however. > > >
