> I built all from source and it seems to work fine :) Great :) > lm85b-i2c-0-2e > Adapter: SMBus I801 adapter at efa0 > in0: +1.52 V (min = +0.00 V, max = +3.32 V) > in1: +1.50 V (min = +0.00 V, max = +2.99 V) > in2: +3.32 V (min = +0.00 V, max = +4.38 V) > in3: +5.21 V (min = +0.00 V, max = +6.64 V) > in4: +11.94 V (min = +0.00 V, max = +15.94 V) > fan1: 4825 RPM (min = 0 RPM) > fan2: 0 RPM (min = 0 RPM) > fan3: 0 RPM (min = 0 RPM) > fan4: 0 RPM (min = 0 RPM) > temp1: +28 C (low = -127 C, high = +127 C) > temp2: +23 C (low = -127 C, high = +127 C) > temp3: +23 C (low = -127 C, high = +127 C) > pwm1: 255 > pwm2: 255 > pwm3: 255 > vid: +1.525 V (VRM Version 9.1) > > Any idea where to find a translation of in0, in1, fan1, > pwm1 etc ? I'm actually astonished that they are not in sensors.conf.eg. Philip, care to provide a sample configuration section for lm85 and clones? Wild guess: in0 == Vcore1 in1 == Vcore2 in2 == +3.3V in3 == +5V in4 == +12V fan1 == CPU Fan temp1 == CPU Temp temp2 & temp3 == Case Temp Just guessing however. -- Jean Delvare http://khali.linux-fr.org/
