> I searched through the mail archives and found that the LM87 chip had > no plans to convert to the 2.6 kernel at the moment. First I wanted > to get an update on that status, and second, I'm going to be using it > on a project im working on, so if there is nothing ported at the > moment, I'll probably end up porting it myself. Actually, the port is > in progress, unfortunately, I don't have my hardware to test it out on > yet. The driver porting directions have been very helpful on getting > started on the conversion. Two other persons have deplored the lack of support of the LM87 in Linux 2.6, I just invited them into this thread ;) I invite you to work together so as not to waste your time and instead share your forces on porting the driver. I think David was wanting to port the driver as well, while Chris was "only" wanting to test it once done. If you have questions while porting the driver, just ask on this list. Once the port is considered ready, post it here in the form of a patch against the latest -mm kernel, and we (most likely I) will review it. Thanks. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
