sensord startup fails due to the fact that it tries to read alarms for ASUS
as99127f subclient that are not available; sensors itself works OK:
Jan 11 13:06:40 localhost sensord: sensord started
Jan 11 13:06:40 localhost sensord: Error getting sensor data: as99127f/#81:
Can't access /proc file
Jan 11 13:06:40 localhost sensord: sensord failed
strace sensord ...
..
open("/sys/bus/i2c/devices/0-0048/alarms", O_RDONLY) = -1 ENOENT (No such file
or directory)
{pts/1}% LC_ALL=C lr /sys/bus/i2c/devices/*/
/sys/bus/i2c/devices/0-002d/:
alarms beep_enable beep_mask detach_state fan_div1 fan_div2
fan_div3 fan_input1 fan_input2 fan_input3 fan_min1 fan_min2
fan_min3 in_input0 in_input1 in_input2 in_input3 in_input4
in_input5 in_input6 in_max0 in_max1 in_max2 in_max3
in_max4 in_max5 in_max6 in_min0 in_min1 in_min2
in_min3 in_min4 in_min5 in_min6 name power/
pwm1 pwm2 pwm_enable2 temp_input1 temp_input2 temp_input3
temp_max1 temp_max2 temp_max3 temp_min1 temp_min2 temp_min3
vid vrm
/sys/bus/i2c/devices/0-002d/power:
state
/sys/bus/i2c/devices/0-0048/:
detach_state name power/
/sys/bus/i2c/devices/0-0048/power:
state
/sys/bus/i2c/devices/0-0049/:
detach_state name power/
/sys/bus/i2c/devices/0-0049/power:
state
{pts/1}% sensors
as99127f-i2c-0-2d
Adapter: SMBus I801 adapter at e800
Algorithm: Unavailable from sysfs
VCore 1: +1.70 V (min = +1.57 V, max = +1.73 V)
+3.3V: +3.47 V (min = +3.14 V, max = +3.49 V)
+5V: +5.00 V (min = +4.73 V, max = +5.24 V)
+12V: +11.37 V (min = +10.82 V, max = +13.19 V)
-12V: -11.57 V (min = -13.22 V, max = -10.74 V) ALARM
-5V: -5.03 V (min = -5.25 V, max = -4.74 V) ALARM
CPU: 4787 RPM (min = 3000 RPM, div = 2)
Front: 2909 RPM (min = 2657 RPM, div = 2)
MB: +29?C (high = +50?C, hyst = +45?C)
CPU: +36.5?C (high = +65?C, hyst = +70?C)
HDD: +39.0?C (high = +45?C, hyst = +50?C)
vid: +1.650 V
alarms:
beep_enable:
Sound alarm enabled
I do not know if it is a sensord (should not attempt to read subclient) or
kernel (does not provide sufficient information) problem. Subclient can be
determined by its name:
{pts/1}% for i in /sys/bus/i2c/devices/*
do
echo ${i:t}:$(<$i/name)
done
0-002d:as99127f
0-0048:as99127f subclient
0-0049:as99127f subclient
Greg, this is supposed to be established convention now?
regards
-andrey
