I was wondering if someone could suggest good min and max values to put into the sensors.conf file or a place to find this information. I'm running a dual xeon motherboard. Here is the current output from sensors. Adapter: SMBus PIIX4 adapter at 0580 Algorithm: Non-I2C SMBus adapter Board: +26?C (low = -55?C, high = +127?C) CPU: +29?C (low = +0?C, high = +85?C) max1617-i2c-0-29 Adapter: SMBus PIIX4 adapter at 0580 Algorithm: Non-I2C SMBus adapter Board: +26?C (low = -55?C, high = +127?C) CPU: +27?C (low = +0?C, high = +85?C) lm87-i2c-0-2d Adapter: SMBus PIIX4 adapter at 0580 Algorithm: Non-I2C SMBus adapter lm87-i2c-0-2e Adapter: SMBus PIIX4 adapter at 0580 Algorithm: Non-I2C SMBus adapter 2.5V: +2.52 V (min = +2.12 V, max = +2.87 V) Vccp1: +1.47 V (min = +0.98 V, max = +1.99 V) 3.3V: +3.26 V (min = +2.80 V, max = +3.78 V) 5V: +4.94 V (min = +4.24 V, max = +5.75 V) 12V: +12.00 V (min = +10.18 V, max = +13.81 V) Vccp2: +1.50 V (min = +1.26 V, max = +1.71 V) fan1: 5314 RPM (min = 2848 RPM, div = 2) fan2: 5357 RPM (min = 2848 RPM, div = 2) temp1: +30?C (low = +0?C, high = +65?C) vid: +1.35 V ===== Don Jessup Asaca/Shibasoku Corp. of America 400 Corporate Circle, Unit G Golden, CO 80401 303-278-1111 X232 donj at asaca.com http://www.asaca.com
