Dear Jean, Thanks for your message - the results of your suggestions are below: 1) Yes - the relevant extract from sensors-detect is copied (manually!) below: Driver 'w83781d' (should be inserted) Detects correctly: * Bus 'SMBus I801 adapter at e800' (Non-I2C SMBus adapter) Busdriver 'i2c-i801', I2C address 0x2d (and 0x48, 0x49) Chip 'Asus AS99127F (rev 2)' (confidence: 8) 2) For version 2.8.0 I did manage to realise that I needed /proc/sys/dev/sensors w83782d-i2c-0-2d (why not w83781d....? - beyond me!) so I attach results from there. Version 2.8.0 - from /proc/sys/dev/sensors/w83782d-i2c-0-2d: in5: 0.33 0.78 0.54 in6: 0.78 0.94 0.83 Version 2.8.1 - from /proc/sys/dev/sensors/as99127f-i2c-0-2d: in5: 2.70 3.33 0.54 in6: 3.15 3.49 0.83 3) I downloaded the lm_sensors2... stuff from the site you gave me - the lm_sensors.. stuff was marked as old code. I managed to compile it, after commenting out some chip IDs which were not recognised and to install it in /lib/modules but could not run sensors -s. The error message was Error: Line 2: Invalid keyword. General parse error. I have no idea which file generated this message. I plan to look at the site again and check that there are no more recent packages to download. Many thanks for your help - it is really appreciated. Please let me know if I have picked up the wrong code! Best wishes, Richard James. On Thu, 11 Dec 2003, Jean Delvare wrote: > > < clip > > > > Version 2.8.0: > > > w83782d-i2c-0-2d > > <clip> > > > Version 2.8.1: > > > as99127f-i2c-0-2d > > > > Just wanted to point out that the 2.8.0 printout was for w83782d, > > while 2.8.1 was for as99127f. So different compute rules in > > sensors.conf were applied. > > Stupid me. Thanks for the notice. > > Richard, do you confirm that recent versions of sensors-detect tell > you you have a revision 2 AS99127F? > > I've checked an improved version of sensors.conf in our CVS repository. > Get it here: > http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/etc/sensors.conf.eg > > Copy it to /etc/sensors.conf, and edit the "as99127f-*" section. You'll > find commented out lines for AS99127F rev.2 in5 and in6. Uncomment them > and you're (hopefully) done. > > -- > Jean Delvare > http://www.ensicaen.ismra.fr/~delvare/ >