-------- Original Message -------- From: - Wed Dec 10 12:04:10 2003 X-UIDL: 6c2ac25ad1c644a2 X-Mozilla-Status: 0011 X-Mozilla-Status2: 00000000 Return-Path: <raj at ast.man.ac.uk> Received: from Stimpy.netroedge.com (IDENT:root at Stimpy.netroedge.com [206.228.191.3]) by Ren.netroedge.com (8.12.10/8.12.10) with ESMTP id hBAJlIpT008330 for <phil at ren.netroedge.com>; Wed, 10 Dec 2003 11:47:18 -0800 Received: from gannet.scg.man.ac.uk (gannet.scg.man.ac.uk [130.88.94.110]) by Stimpy.netroedge.com (8.12.10/8.12.10) with ESMTP id hBAK931s032375 for <nobody at stimpy.netroedge.com>; Wed, 10 Dec 2003 12:09:04 -0800 Received: from axp0.ast.man.ac.uk ([130.88.9.45]) by gannet.scg.man.ac.uk with esmtp (Exim 4.20) id 1AUAX4-000IqK-BY for nobody at stimpy.netroedge.com; Wed, 10 Dec 2003 20:02:02 +0000 Received: from raj (helo=localhost) by axp0.ast.man.ac.uk with local-esmtp (Exim 2.12 #1) id 1AUAWx-00021y-00 for nobody at Stimpy.netroedge.com; Wed, 10 Dec 2003 20:01:55 +0000 Date: Wed, 10 Dec 2003 20:01:55 +0000 (GMT) From: Richard James <raj at ast.man.ac.uk> To: Nobody <nobody at stimpy.netroedge.com> Subject: Re: Ticket number 1467 - reply to comments by Khali In-Reply-To: <200312062207.hB6M7vD7002389 at Stimpy.netroedge.com> Message-ID: <Pine.OSF.4.53.0312102000150.4026 at axp0.ast.man.ac.uk> References: <200312062207.hB6M7vD7002389 at Stimpy.netroedge.com> MIME-Version: 1.0 Content-Type: TEXT/PLAIN; charset=ISO-8859-1 X-Scanner: exiscan for exim4 (http://duncanthrax.net/exiscan/) *1AUAX4-000IqK-BY*72dnd958xvk* Content-Transfer-Encoding: 8bit X-MIME-Autoconverted: from QUOTED-PRINTABLE to 8bit by Ren.netroedge.com id hBAJlIpT008330 X-Quarentine-Loop: Processed X-Spambayes-Classification: ham; 0.02 1) I run "sensors -s" during bootup so this is not the problem. 2) As regards the version of sensors.conf, I have tried copying lm_sensors-2.8.x/etc/sensors.conf.eg to sensors.conf for x = 0 and 1. I have tried both versions of this file with both versions (2.8.0 and 2.8.1) of the software. The behaviour of each version is independent of which sensors.conf file I use. I also tried with the old version of sensors.conf from 2.7.0 - this also made no difference. 3) My motherboard is a standard Asus p4b with monitor chip as99127f. I am using the chip driver w83781d working with i2c-proc, i2c-dev, i2c-i801 and i2c-core. As noted in ticket no 1466 the module p4b_smbus is not required with the 2.4.23 kernel - this is a new feature in the series of kernels. I have tried installing modules from versions 2.8.0 or 2.8.1, taking care to use matching versions of i2c and lm_sensors. Version 2.8.0 works fine but version 2.8.1 does not. I append the output from sensors for the two cases: Version 2.8.0: w83782d-i2c-0-2d Adapter: SMBus I801 adapter at e800 Algorithm: Non-I2C SMBus adapter VCore 1: +1.74 V (min = +1.74 V, max = +1.93 V) ALARM (beep) VCore 2: +1.82 V (min = +1.74 V, max = +1.93 V) (beep) +3.3V: +3.28 V (min = +3.13 V, max = +3.45 V) (beep) +5V: +5.12 V (min = +4.72 V, max = +5.24 V) (beep) +12V: +11.97 V (min = +10.79 V, max = +13.19 V) -12V: -12.13 V (min = -13.21 V, max = -10.90 V) -5V: -5.10 V (min = -5.26 V, max = -4.76 V) V5SB: +0.13 V (min = +0.13 V, max = +0.13 V) VBat: +0.08 V (min = +0.08 V, max = +0.08 V) fan1: 6683 RPM (min = 3000 RPM, div = 2) (beep) fan2: 231 RPM (min = 187 RPM, div = 32) (beep) fan3: 0 RPM (min = 3000 RPM, div = 2) temp1: +31?C (limit = +60?C) sensor = thermistor (beep) temp2: +30.0?C (limit = +60?C, hysteresis = +50?C) sensor = thermistor (beep) temp3: +255.5?C (limit = +60?C, hysteresis = +50?C) sensor = 3904 transistor vid: +1.850 V alarms: beep_enable: Sound alarm disabled Version 2.8.1: as99127f-i2c-0-2d Adapter: SMBus I801 adapter at e800 Algorithm: Non-I2C SMBus adapter VCore 1: +1.74 V (min = +1.74 V, max = +1.94 V) ALARM VCore 2: +1.82 V (min = +1.74 V, max = +1.94 V) +3.3V: +3.28 V (min = +3.14 V, max = +3.46 V) +5V: +5.11 V (min = +4.74 V, max = +5.24 V) +12V: +11.93 V (min = +10.83 V, max = +13.19 V) (beep) -12V: -2.15 V (min = -13.23 V, max = -10.73 V) (beep) -5V: -1.25 V (min = -5.25 V, max = -4.74 V) (beep) fan1: 6683 RPM (min = 3000 RPM, div = 2) fan2: 3668 RPM (min = 3000 RPM, div = 2) fan3: 0 RPM (min = 3000 RPM, div = 2) (beep) M/B Temp: +32?C (limit = +60?C) CPU Temp: +30.0?C (limit = +120?C, hysteresis = +100?C) temp3: +255.4?C (limit = +120?C, hysteresis = +100?C) (beep) vid: +1.850 V alarms: beep_enable: Sound alarm disabled I would also comment that version 2.8.1 works perfectly on a Pentium Pro system with a VS440FX motherboard. Please let me know if there is any more information I can supply. Yours sincerely, Richard James.
