* Mori Hiroyuki <hiro_yuki_mori at yahoo.co.jp> [2003-12-08 01:30:32 +0900]: > Now, I tried to set vrm to 9.0 based on doc/vid > information with following command. > Currently I'm using Petimum4 3GHz. In this case, I should > be set vrm=9.0. Is this correct? Yes. > # echo 9.0 >/proc/sys/dev/sensors/w83627thf-isa-0290/vrm > > After this, I read vid value. > > # cat /proc/sys/dev/sensors/w83627thf-isa-0290/vid > 0.000 > > I still get 0.000. Why? The w83627thf driver support for VID is broken. I'll be fixing that shortly - hopefully in time for the 2.8.2 release. Please check back in about a week. > >As for the VCore 1 readings, you might need to divide the > value by 2. > >Never see that before though. > OK. I guessed so. I think the driver is broken here as well. Again I hope to fix this soon. Regards, -- Mark M. Hoffman mhoffman at lightlink.com
