Hi again Hans-Frieder, > Recent failure reports with the i2c-nforce2+eeprom combination led me > to the conclusion that your i2c-norce2 module might not support > i2c_smbus_write_byte() correctly. It is used in the eeprom driver and > doesn't seem to set the address register as it should. Mark D. Studebaker probably found and fixed that bug. The following change was made to your driver: Index: i2c-nforce2.c =================================================================== RCS file: /home/cvs/lm_sensors2/kernel/busses/i2c-nforce2.c,v retrieving revision 1.6 retrieving revision 1.7 diff -u -r1.6 -r1.7 --- i2c-nforce2.c 3 Aug 2003 05:32:01 -0000 1.6 +++ i2c-nforce2.c 27 Nov 2003 02:37:43 -0000 1.7 @@ -143,7 +143,7 @@ case I2C_SMBUS_BYTE: if (read_write == I2C_SMBUS_WRITE) - outb_p(data->byte, NVIDIA_SMB_DATA); + outb_p(command, NVIDIA_SMB_CMD); protocol |= NVIDIA_SMB_PRTCL_BYTE; break; Comments on this change are welcome. If you confirm it's OK, I'll send a patch to Greg KH to update the driver present in Linux 2.6. Thanks. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
