On Tue, 11 Nov 2003 01:29:29 -0500 "Mark M. Hoffman" <mhoffman at lightlink.com> wrote: > vitalyb wrote in ticket #1437: > > > asb100??s chip address: 0x2d > > pwm data address: 0x59 > > default value: 0x8f > > > > lower nybble (with a mask 0x0f) regulates Power and Chassis Fans, but not a CPU > > fan > > > > it looks like if higher (7) bit is set, manual control is enabled, ie if > > register contains 0x85 fan??s speed will be around 5/16 > > > > but if bits 5 and/or 6 are set and bit 7 is not, fan speed is constantly > > lowering (approx. every 4 sec.) > > So, I tried the attached patch (vs. current CVS) with no result here: > modifying the pwm did not change any fan speeds at all. But maybe > there are different ASB100 revs? Who knows? The patch didn't > seem to hurt anything, so if it works for you I'll commit it. $ echo $[ 0x80 ] 1 > pwm1 It works for me! Thanks! I have an Asus A7V8X mobo rev 1.04, ASB100 chip marking follows ASB100-A Bach TPV268981 0240E i2cdump`s output for banks 0-4 is attached. And I checked a photo in the manual. It is a mobo rev 1.02 ASB100 marking: ASB100-A Bach TKF100471AE 0227 Looks differently... > BTW: thanks for the info... anything else you can find out about > that chip, please email (sensors at stimpy.netroedge.com) us. OK. -- Regards, Vitaly V. Bursov mailto:vitalyb at mail333.com GPG Key ID: F95A23B9 http://www.gnupg.org -------------- next part -------------- A non-text attachment was scrubbed... Name: asb100-dump.gz Type: application/octet-stream Size: 683 bytes Desc: not available Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20031111/0c1fbb89/attachment.obj
