More details below ----- Original Message ----- From: "Vaughn Rhodes" <Vaughn.Rhodes at ArimaCorp.com> Sent: Tuesday, October 21, 2003 5:40 PM Subject: RE: Driver to read fantach under Linux > John & Bob, > > Arima's solution for reading fan speeds (and CPU temp and voltages) > under Linux is the open source "lm_sensors" program. Attached is the > release version of lm_sensors for Arima's HDAMA server motherboard. It > consists of a single file, sensors.conf, and this has been tested and > validated on RedHat 7.3/8.0/9.0 and SuSE SLES8 for AMD64. In addition to > this Arima-specific sensors.conf file, you will also need the following > three files: > > 1) Download i2c-2.7.0.tar.gz from > http://secure.netroedge.com/~lm78/archive/i2c-2.7.0.tar.gz > 2) Download lm_sensors-2.7.0.tar.gz from > http://www.lm-sensors.nu/archive/lm_sensors-2.7.0.tar.gz > 3) Download lm_sensors-2.7.0-adm1026-14.patch from > ftp://ftp.penguincomputing.com/pub/updates/lmsensors/lm_sensors-2.7.0-ad > m1026-14.patch (lm_sensors patch for the ADM1026 monitor chip written by > Philip Pokorny from Penguin Computing) > > (if you have trouble downloading any of the above files, let me know and > I'll email them to you) > > Please see the attached readme files for detailed installation > instructions by operating system version. > > Please contact me if you encounter any problems with this. > > Best regards, > > Vaughn Rhodes > Director of Business Development > Arima Group, North America > 39899 Balentine Drive, Suite 197 > Newark, CA 94560 > P: 510-687-0966 x223 > F: 510-687-0968 > vaughn.rhodes at arimacorp.com > www.arimacorp.com >
