so you have 'sensors' working on 2.6?
I'm having trouble understanding what you did from looking at the diff.
Could you explain if this is a general fix compatible for both 2.4 and
2.6 or
is there much more to do...
thanks
mds
Danny Backx wrote:
>
> I'm sure I'm boring you by now. Sorry.
>
> The names of the files in /sys were all different than what
> chips.c said. This caused much of the mismatch. The hardcoded
> file names are completely gone now. Voltage values start to
> make sense :
> dell: {227} prog/sensors/sensors
> w83627hf-i2c-/sys/bus/i2c/devices/0-0290
> Adapter: Dummy adapter
> Algorithm: Dummy algorithm
> in_input0:+14.40 V (min = +12.16 V, max = +14.88 V)
> in_input1:+24.80 V (min = +12.16 V, max = +14.88 V)
> in_input2:+33.44 V (min = +29.76 V, max = +36.32 V)
> in_input3:+29.92 V (min = +26.88 V, max = +32.64 V)
> in_input4:+31.52 V (min = +28.48 V, max = +34.56 V)
> in_input5:+12.16 V (min = +3.36 V, max = +7.84 V)
> in_input6:+15.04 V (min = +7.04 V, max = +10.24 V)
> in_input7:+32.80 V (min = +26.88 V, max = +32.64 V) ALARM
> in_input8:+32.96 V (min = +27.04 V, max = +32.96 V) ALARM
> fan_input1:
> 1622 RPM (min = 187 RPM, div = 32)
> fan_input2:
> 3013 RPM (min = 187 RPM, div = 32)
> fan_input3:
> 0 RPM (min = 375 RPM, div = 16)
> temp_input1:
> +390??C (limit = +0??C, hysteresis = +0??C) sensor =
> thermistor
> temp_input2:
> +480.0??C (limit = +0??C, hysteresis = +0??C) sensor =
> PII/Celeron diode
> temp_input3:
> +2080.0??C (limit = +0??C, hysteresis = +0??C) sensor =
> thermistor
> vid: +1.350 V
> alarms:
> beep_enable:
> Sound alarm disabled
>
> I'll leave it to you to figure out RPM and temperatures.
>
> New patch included.
>
> Danny
>
>
> Name: diff-to-cvs.gz
> diff-to-cvs.gz Type: application/x-gzip
> Encoding: base64
