I'm sure I'm boring you by now. Sorry.
The names of the files in /sys were all different than what
chips.c said. This caused much of the mismatch. The hardcoded
file names are completely gone now. Voltage values start to
make sense :
dell: {227} prog/sensors/sensors
w83627hf-i2c-/sys/bus/i2c/devices/0-0290
Adapter: Dummy adapter
Algorithm: Dummy algorithm
in_input0:+14.40 V (min = +12.16 V, max = +14.88 V)
in_input1:+24.80 V (min = +12.16 V, max = +14.88 V)
in_input2:+33.44 V (min = +29.76 V, max = +36.32 V)
in_input3:+29.92 V (min = +26.88 V, max = +32.64 V)
in_input4:+31.52 V (min = +28.48 V, max = +34.56 V)
in_input5:+12.16 V (min = +3.36 V, max = +7.84 V)
in_input6:+15.04 V (min = +7.04 V, max = +10.24 V)
in_input7:+32.80 V (min = +26.88 V, max = +32.64 V) ALARM
in_input8:+32.96 V (min = +27.04 V, max = +32.96 V) ALARM
fan_input1:
1622 RPM (min = 187 RPM, div = 32)
fan_input2:
3013 RPM (min = 187 RPM, div = 32)
fan_input3:
0 RPM (min = 375 RPM, div = 16)
temp_input1:
+390?C (limit = +0?C, hysteresis = +0?C) sensor =
thermistor
temp_input2:
+480.0?C (limit = +0?C, hysteresis = +0?C) sensor =
PII/Celeron diode
temp_input3:
+2080.0?C (limit = +0?C, hysteresis = +0?C) sensor =
thermistor
vid: +1.350 V
alarms:
beep_enable:
Sound alarm disabled
I'll leave it to you to figure out RPM and temperatures.
New patch included.
Danny
-------------- next part --------------
A non-text attachment was scrubbed...
Name: diff-to-cvs.gz
Type: application/x-gzip
Size: 6921 bytes
Desc: not available
Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20031011/794a8b4e/attachment.gz
