Which motherboard do you have?
Jean Delvare wrote:
>>Hi,
>>I'm using a board with ServerWorks OSB4 and a ADM1026 chip.
>>The computer always hangs here...
>>Next adapter: SMBus PIIX4 adapter at 0580 (Non-I2C SMBus adapter)
>>Do you want to scan it? (YES/no/selectively): YES
>>I'm using Redhat 7.3 with a generic 2.4.18 kernel, and
>>lm_sensors-2.8.1. However, if I add something like "print("$addr");"
>>in the sensors-detect scirpt, it won't hang anymore!
>
>
> Strange. Where exactly do you add this line?
>
>
>>But still no chip detected.
>>I see no one report this issue on the website.
>>I'm appreciated if you can give me some help or advices.
>
>
> If you are sure you have a ServerWorks OSB4 and an ADM1026 chip, you
> could skip the detection step and load i2c-piix4 and adm1026 directly.
> That said, if sensors-detect has difficulties finding the chip, I expect
> that it won't work that easily. Check the logs while inserting the
> modules, it might give you relevant information.
>
>
--
Philip Pokorny, Director of Engineering
Tel: 415-358-2635 Fax: 415-358-2646 Toll Free: 888-PENGUIN
PENGUIN COMPUTING, INC.
www.penguincomputing.com
