Jean, Not sure is Alex is interested in this, if not I'm sure he'll say so. I've installed 2.8.1 and here the early results: lm90-i2c-0-4c Adapter: SMBus AMD75x adapter at 06e0 Algorithm: Non-I2C SMBus adapter M/B Temp: +45?C (low = +5?C, high = +70?C) CPU Temp: +55.6?C (low = +5.0?C, high = +70.0?C) tcrit1: +85?C tcrit2: +85?C hyst: +10?C So yes, the lm90 (if that's what's on my MPX2) is being read correctly (and with higher precision). Apparently only CPU0 is supported, I didn't see anything in the docs or configuration filers that would suggest otherwise, so I assume you haven't been able to incorporate Alex's suggestion yet. Let me know if my assumption is wrong and there is something else for me to test. I also think the reporting is cleaned up a bit over 2.8.0. Before I was getting temperature readings reported for the adapter and the chip, in 2.8.1 it is much nicer (unless I had something configured wrong before). What is the meaning/purpose of tcrit over temp_high? Lamar
