Well, FWIW, removing the driver from loading still gives me valid info from the it87 and lm90 that match the sensor readings from the mobo bios. I can only assume that the implementation of the chip on my mobo is non-standard or incorrect. Nonetheless, the reaction was SEVERE! I felt it was worth reporting if for no other reason than to spare others what occurred with me. Not to worry, I was fully backed up, so all I lost was a little time!!!!! Thanks for writing back. On Fri, 2003-10-03 at 07:22, Mark Studebaker wrote: > this could simply be from chip reset or limit setting by the driver > at initialization. This causes an ALERT output from the chip > which the BIOS interprets as an overtemp and shuts the > system down immediately. > > (another reason for init=0 being the default) > > But if the option line prevents the driver from accessing > the chip at all, then this isn't the problem... > > Peter Hyman wrote: > > > > On Fri, 2003-09-19 at 14:00, Jean Delvare wrote: > > > > > Now, for the adm1021 problems, I'm puzzled. The option line in > > > > > /etc/sensors.conf, as suggested by sensors-detect, prevents the > > > > > driver from using any of the three addresses at which you have > > > > > chipsets (0x18, 0x4c, 0x4e) so loading it shouldn't have had any > > > > > effect. > > > > > > Now that I come to think of it again, one question: did you actually > > > edit /etc/modules.conf as sensors-detect told you? Having failed to do > > > so would explain (but not forgive) how adm1021 could cause trouble on > > > your system. > > > > > Yes, I edited modules.conf exactly as suggested with the exclusions for > > adm1021 listed. > > > > > > The only possible thing I was thinking was that in my > > > > kernel config file, while no modules are loaded, there is one line > > > > that is strange. > > > > > > > > CONFIG_I2C_MAINBOARD=y > > > > > > I never saw that option anywhere. Grep'ing linux 2.4.22 sources for it > > > did not return anything. Could it be some Mandrake add-on? > > > > > > > is the only thing checked off. > > > > > > You mean checked *on*? > > Yes, sorry.Selected. As I said, I think that is for a submenu to allow > > for selecting modules for compilation or to be built in the kernel. > > Saying N above would skip all the choices if using xconfig or menuconfig > > to edit .config. I don't think it's a driver, but simply a group > > selector. > > > > As I said, I am happy it works, but the failure of adm1021 remains a > > mystery! > > > > Cheers! > > -- > > Peter Hyman > > Home:(609)395-1211 Office: (609)655-1184, Fax:(609)655-0285 > > Stop Telemarketers. Sign up for Do Not Call at http://donotcall.gov > > > > > > Name: signature.asc > > signature.asc Type: application/pgp-signature > > Description: This is a digitally signed message part -- Peter Hyman Home:(609)395-1211 Office: (609)655-1184, Fax:(609)655-0285 Stop Telemarketers. Sign up for Do Not Call at http://donotcall.gov -------------- next part -------------- A non-text attachment was scrubbed... Name: not available Type: application/pgp-signature Size: 193 bytes Desc: This is a digitally signed message part Url : http://lists.lm-sensors.org/pipermail/lm-sensors/attachments/20031003/f5a2e2d5/attachment.bin
