ChangeSet 1.1315.1.13, 2003/09/22 12:26:49-07:00, greg at kroah.com I2C: clean up the drivers/i2c/Kconfig file drivers/i2c/Kconfig | 102 +++++++++++++++++++--------------------------------- 1 files changed, 38 insertions(+), 64 deletions(-) diff -Nru a/drivers/i2c/Kconfig b/drivers/i2c/Kconfig --- a/drivers/i2c/Kconfig Mon Sep 22 16:13:58 2003 +++ b/drivers/i2c/Kconfig Mon Sep 22 16:13:58 2003 @@ -22,10 +22,20 @@ If you want I2C support, you should say Y here and also to the specific driver for your bus adapter(s) below. - This I2C support is also available as a module. If you want to - compile it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-core. + This I2C support can also be built as a module. If so, the module + will be called i2c-core. + +config I2C_CHARDEV + tristate "I2C device interface" + depends on I2C + help + Say Y here to use i2c-* device files, usually found in the /dev + directory on your system. They make it possible to have user-space + programs use the I2C bus. Information on how to do this is + contained in the file <file:Documentation/i2c/dev-interface>. + + This support is also available as a module. If so, the module + will be called i2c-dev. config I2C_ALGOBIT tristate "I2C bit-banging interfaces" @@ -35,10 +45,8 @@ adapters. Say Y if you own an I2C adapter belonging to this class and then say Y to the specific driver for you adapter below. - This support is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-algo-bit. + This support is also available as a module. If so, the module + will be called i2c-algo-bit. config I2C_PROSAVAGE tristate "S3/VIA (Pro)Savage" @@ -51,14 +59,8 @@ S3/VIA KM266/VT8375 aka ProSavage8 S3/VIA KM133/VT8365 aka Savage4 - This can also be built as a module which can be inserted and removed - while the kernel is running. If you want to compile it as a module, - say M here and read <file:Documentation/modules.txt>. - The module will be called i2c-prosavage. - - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu + This support is also available as a module. If so, the module + will be called i2c-prosavage. config I2C_PHILIPSPAR tristate "Philips style parallel port adapter" @@ -67,13 +69,8 @@ This supports parallel-port I2C adapters made by Philips. Say Y if you own such an adapter. - This driver is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-philips-par. - - Note that if you want support for different parallel port devices, - life will be much easier if you compile them all as modules. + This support is also available as a module. If so, the module + will be called i2c-philips-par. config I2C_ELV tristate "ELV adapter" @@ -82,10 +79,8 @@ This supports parallel-port I2C adapters called ELV. Say Y if you own such an adapter. - This driver is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-elv. + This support is also available as a module. If so, the module + will be called i2c-elv. config I2C_VELLEMAN tristate "Velleman K9000 adapter" @@ -94,10 +89,8 @@ This supports the Velleman K9000 parallel-port I2C adapter. Say Y if you own such an adapter. - This driver is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-velleman. + This support is also available as a module. If so, the module + will be called i2c-velleman. config SCx200_I2C tristate "NatSemi SCx200 I2C using GPIO pins" @@ -107,7 +100,8 @@ If you don't know what to do here, say N. - If compiled as a module, it will be called scx200_i2c. + This support is also available as a module. If so, the module + will be called scx200_i2c. config SCx200_I2C_SCL int "GPIO pin used for SCL" @@ -133,7 +127,8 @@ If you don't know what to do here, say N. - If compiled as a module, it will be called scx200_acb. + This support is also available as a module. If so, the module + will be called scx200_acb. config I2C_ALGOPCF tristate "I2C PCF 8584 interfaces" @@ -143,10 +138,8 @@ Say Y if you own an I2C adapter belonging to this class and then say Y to the specific driver for you adapter below. - This support is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-algo-pcf. + This support is also available as a module. If so, the module + will be called i2c-algo-pcf. config I2C_ELEKTOR tristate "Elektor ISA card" @@ -155,10 +148,8 @@ This supports the PCF8584 ISA bus I2C adapter. Say Y if you own such an adapter. - This driver is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-elektor. + This support is also available as a module. If so, the module + will be called i2c-elektor. config I2C_KEYWEST tristate "Powermac Keywest I2C interface" @@ -167,9 +158,8 @@ This supports the use of the I2C interface in the combo-I/O chip on recent Apple machines. Say Y if you have such a machine. - This driver is also available as a module. If you want to compile - it as a module, say M here and read Documentation/modules.txt. - The module will be called i2c-keywest. + This support is also available as a module. If so, the module + will be called i2c-keywest. config ITE_I2C_ALGO tristate "ITE I2C Algorithm" @@ -179,9 +169,8 @@ systems. Say Y if you have one of these. You should also say Y for the ITE I2C peripheral driver support below. - This support is also available as a module. If you want to compile - it as a module, say M here and read Documentation/modules.txt. - The module will be called i2c-algo-ite. + This support is also available as a module. If so, the module + will be called i2c-algo-ite. config ITE_I2C_ADAP tristate "ITE I2C Adapter" @@ -191,9 +180,8 @@ systems. Say Y if you have one of these. You should also say Y for the ITE I2C driver algorithm support above. - This support is also available as a module. If you want to compile - it as a module, say M here and read Documentation/modules.txt. - The module will be called i2c-adap-ite. + This support is also available as a module. If so, the module + will be called i2c-adap-ite. config I2C_ALGO8XX tristate "MPC8xx CPM I2C interface" @@ -210,20 +198,6 @@ config I2C_IOP3XX tristate "Intel XScale IOP3xx on-chip I2C interface" depends on ARCH_IOP3XX && I2C - -config I2C_CHARDEV - tristate "I2C device interface" - depends on I2C - help - Say Y here to use i2c-* device files, usually found in the /dev - directory on your system. They make it possible to have user-space - programs use the I2C bus. Information on how to do this is - contained in the file <file:Documentation/i2c/dev-interface>. - - This code is also available as a module. If you want to compile - it as a module, say M here and read - <file:Documentation/modules.txt>. - The module will be called i2c-dev. source drivers/i2c/busses/Kconfig source drivers/i2c/chips/Kconfig
