ChangeSet 1.1315.1.12, 2003/09/22 11:42:40-07:00, greg at kroah.com I2C: clean up the i2c chips Kconfig logic and help information drivers/i2c/chips/Kconfig | 111 +++++++++++++++++++--------------------------- 1 files changed, 46 insertions(+), 65 deletions(-) diff -Nru a/drivers/i2c/chips/Kconfig b/drivers/i2c/chips/Kconfig --- a/drivers/i2c/chips/Kconfig Mon Sep 22 16:14:08 2003 +++ b/drivers/i2c/chips/Kconfig Mon Sep 22 16:14:08 2003 @@ -1,112 +1,93 @@ # -# Sensor device configuration -# All depend on EXPERIMENTAL and I2C +# I2C Sensor device configuration # menu "I2C Hardware Sensors Chip support" +config I2C_SENSOR + tristate + default n + config SENSORS_ADM1021 - tristate " Analog Devices ADM1021 and compatibles" + tristate "Analog Devices ADM1021 and compatibles" depends on I2C && EXPERIMENTAL + select I2C_SENSOR help If you say yes here you get support for Analog Devices ADM1021 and ADM1023 sensor chips and clones: Maxim MAX1617 and MAX1617A, Genesys Logic GL523SM, National Semi LM84, TI THMC10, - and the XEON processor built-in sensor. This can also - be built as a module which can be inserted and removed while the - kernel is running. + and the XEON processor built-in sensor. - The module will be called adm1021. - - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu + This driver can also be built as a module. If so, the module + will be called adm1021. config SENSORS_IT87 - tristate " National Semiconductors IT87 and compatibles" + tristate "National Semiconductors IT87 and compatibles" depends on I2C && EXPERIMENTAL + select I2C_SENSOR help - The module will be called it87. + If you say yes here you get support for National Semiconductor IT87 + sensor chips and clones: IT8705F, IT8712F and SiS960. - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu + This driver can also be built as a module. If so, the module + will be called it87. config SENSORS_LM75 - tristate " National Semiconductors LM75 and compatibles" + tristate "National Semiconductors LM75 and compatibles" depends on I2C && EXPERIMENTAL + select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM75 sensor chips and clones: Dallas Semi DS75 and DS1775, TelCon - TCN75, and National Semi LM77. This can also be built as a module - which can be inserted and removed while the kernel is running. - - The module will be called lm75. - - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu - -config SENSORS_LM85 - tristate " National Semiconductors LM85 and compatibles" - depends on I2C && EXPERIMENTAL - help - If you say yes here you get support for National Semiconductor LM85 - sensor chips and clones: ADT7463 and ADM1027. - This can also be built as a module which can be inserted and - removed while the kernel is running. + TCN75, and National Semi LM77. - The module will be called lm85. + This driver can also be built as a module. If so, the module + will be called lm75. - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu - config SENSORS_LM78 - tristate " National Semiconductors LM78 and compatibles" + tristate "National Semiconductors LM78 and compatibles" depends on I2C && EXPERIMENTAL + select I2C_SENSOR help If you say yes here you get support for National Semiconductor LM78, LM78-J and LM79. This can also be built as a module which can be inserted and removed while the kernel is running. - The module will be called lm78. + This driver can also be built as a module. If so, the module + will be called lm78. + +config SENSORS_LM85 + tristate "National Semiconductors LM85 and compatibles" + depends on I2C && EXPERIMENTAL + select I2C_SENSOR + help + If you say yes here you get support for National Semiconductor LM85 + sensor chips and clones: ADT7463 and ADM1027. + + This driver can also be built as a module. If so, the module + will be called lm85. - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu - config SENSORS_VIA686A - tristate " VIA686A" + tristate "VIA686A" depends on I2C && EXPERIMENTAL + select I2C_SENSOR help - support for via686a If you say yes here you get support for the integrated sensors in - Via 686A/B South Bridges. This can also be built as a module - which can be inserted and removed while the kernel is running. + Via 686A/B South Bridges. - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu + This driver can also be built as a module. If so, the module + will be called via686a. config SENSORS_W83781D - tristate " Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" + tristate "Winbond W83781D, W83782D, W83783S, W83627HF, Asus AS99127F" depends on I2C && EXPERIMENTAL + select I2C_SENSOR help If you say yes here you get support for the Winbond W8378x series of sensor chips: the W83781D, W83782D, W83783S and W83682HF, - and the similar Asus AS99127F. This - can also be built as a module which can be inserted and removed - while the kernel is running. + and the similar Asus AS99127F. - You will also need the latest user-space utilties: you can find them - in the lm_sensors package, which you can download at - http://www.lm-sensors.nu - -config I2C_SENSOR - tristate - default y if SENSORS_ADM1021=y || SENSORS_IT87=y || SENSORS_LM75=y || SENSORS_VIA686A=y || SENSORS_W83781D=y || SENSORS_LM85=y - default m if SENSORS_ADM1021=m || SENSORS_IT87=m || SENSORS_LM75=m || SENSORS_VIA686A=m || SENSORS_W83781D=m || SENSORS_LM85=m - default n + This driver can also be built as a module. If so, the module + will be called w83781d. endmenu
