try loading the w83627hf and i2c-isa drivers first (to access the 627 HF using the ISA bus), then load the w83781d driver. Andrew Pilley wrote: > > Hi, > > i just recently moved to linux 2.4.22, since the XFS patch from sgi has > been released, and i've noticed a problem that seems to have been > introduced into the i2c patches available from: > http://www.ensicaen.ismra.fr/~delvare/devel/i2c/ > > The patches work, in that they do compile, but i can't get the w83781d > driver to actually activate both of the sensor chips, I'm only getting > half the readings: > namely, the one labelled > > w83627hf-i2c-0-2c > Adapter: SMBus AMD75x adapter at 80e0 > > shows up, but the other one (starts with "w83782d-*", forget the full > string), does not. > > i'm using the sensors.conf provided by tyan on their website, which was > working fine when i was using 2.4.21-xfs. I've tried it both with and > without the options tyan ask you to add into modules.conf, and i'm not > sure what else to try. > > Can you offer any suggestions as to things i can use to track down the > source of the problem? > > Thanks > > Andrew 'ashridah' Pilley > > -- > I hereby pose this question for analysis. > Are Microsoft users smarter than hamsters? > *Bluescreen* Reboot *Bluescreen* Reboot *Bluescreen* Reboot > Hamsters 1, Users 0.
