> I just have a problem with one fan in my system. The processor fan > works correctly. But I recently added a system-fan which I connected > to FAN3 connector on my board. But when I type 'sensors' I get only > fan-output for FAN1 (CPU) and FAN2 (no fan connected so its every time > 0) but no data for FAN3 where my system-fan is conneced to. I hope, > you can help me to get it working :) > Winbond chip: W83697HF > Mainboard: Epox EP-8KHA+ > Sensors ver: 2.7.0-r1 > Kernel: 2.4.20 The W83697HF has only two fans inputs. Three possibilities: 1* You don't really have a W83697HF, but some similar chip (w83627hf, w83627thf...) with three fan inputs. 2* You really have a W83697HF, and the third fan cannot be monitored. 3* You really have a W83697HF, and there's a secondary chip for monitoring the third fan. The sensors-detect script should tell you. The manual of your motherboad could help choosing between these possibilities. Or you could provide the output of sensors-detect (after unloading *all* i2c chip drivers; when asked for undetectable adapters, say no). Using the CVS version of the script would be better: http://www2.lm-sensors.nu/~lm78/cvs/lm_sensors2/prog/detect/sensors-detect since we've improved it much since 2.7.0 was released. > Random witze fortune: > (...) Please avoid that next time. -- Jean Delvare http://www.ensicaen.ismra.fr/~delvare/
